Advertisement
Page 2
Key Features
Warm-air recycling system speeds warm-up, improves thermal efficiency.
l
Unique air-directional flap directs air upward for fast face drying.
l
Aerodynamic design reduces drying time and power consumption.
l
Motor vibration isolation system reduces noise to a minimum.
l
Robust diecast alloy case is hard to damage, easy to clean.
l
Two overload sensors with automatic motors and element cutoff.
l
Key Specifications
Model Number
SD100
Element
2.2 kW protected by 100°C cutout
Fan
Electronically balanced pressed metal
Motor
Sealed ball bearing motor with thermal protection
Electrical
220 – 240 AC 50 Hz, 9.8 amps
Air Volume
52 Litres per second
Stop/Start
Infra-red electronic sensor
Overheat
Cuts out if thermally overloaded
Reset
Automatically resets at normal temperature
Cutout
Cuts out after 60 seconds if sensor obstructed
Reset
Automatically resets when obstruction removed
Case
White powder coated alloy diecasting
Height (mm)
252
Width (mm)
287
Depth (mm)
185
Read These Warnings First
Please read all installation requirements, installation procedures and
precautions before installing any Superdry hand dryer.
Never attempt to install any Superdry hand dryer without reading all of the
applicable instructions.
All electrical connections must comply with current wiring rules.
This appliance is not designed for use by young children or infirm people
without supervision.
Young children should be prevented from having access to ensure they are not
able to use or play with the heater.
This appliance must be earthed.
If the power supply cord is damaged it must be replaced by a HydroTap
Company Service Provider or a qualified electrician.
Do not remove the cover of the appliance under any circumstances without
first isolating the appliance from the power supply.
Do not use strong, corrosive or abrasive cleaners to clean the case of the
appliance.
Superdry Installation & Operating Instructions - 87297 - June 2008
Advertisement
