Care And Cleaning; Troubleshooting - Electrolux GK58PCN User Manual

Cookware made of enamelled
steel and with aluminium or
copper bottoms can cause the
colour change on the glass-
ceramic surface.
5.2 Energy saving
• If it is possible, always put the lids on
the cookware.

6. CARE AND CLEANING

6.1 General information
• Clean the hob after each use.
• Always use cookware with clean
bottom.
• Scratches or dark stains on the surface
have no effect on how the hob
operates.
• Use a special scraper for the glass.
• Use a special cleaner applicable for the
surface of the hob.
6.2 Cleaning of the hob
• Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,

7. TROUBLESHOOTING

7.1 What to do if...
Problem
You cannot activate or op-
erate the hob.
Residual heat indicator
does not come on.
WARNING!
Refer to Safety chapters.
WARNING!
Refer to Safety chapters.
• Put cookware on a cooking zone
before you start it.
• Use the residual heat to keep the food
warm or to melt it.
• The bottom of the pans and cooking
zones must have the same dimension.
the dirt can cause damage to the hob.
Put the special scraper on the glass
surface at an acute angle and move
the blade on the surface.
• Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and some detergent. After
cleaning, rub the hob dry with a soft
cloth.
Possible cause
The fuse is released.
The zone is not hot be-
cause it operated only for a
short time.
ENGLISH
Remedy
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
If the zone operated suffi-
ciently long to be hot,
speak to an Authorised
Service Centre.
7