Table of Contents
Advertisement
with the arrow facing up.
2.
Plug the other end of the charger into the
appropriate electrical outlet (100~230VAC).
3.
When your phone indicates that the battery is
fully charged, press the release tab and remove
the travel charger.
Note:
1.
Before charge, make sure the battery is
installed in the phone.
2.
If the status lamp flashes in red, please remove
your travel charger and insert it again. If this
makes no effect, stop charge and send the
charger for repair.
3.
If the battery's charge is extremely low, the sub
LCD may not light even when charge has
begun. After a period of charge then the LCD
can light.
Removing the Battery
Make sure your phone is powered off so that you don't
lose any unsaved information.
Push down the battery release latch and lift the
battery off the phone.
Advertisement
Table of Contents
