Summary of Contents for LG LSK279-8TZM
- Page 1 Dual Tuner DVR STB Users Manual (Draft Version) ( Model : LSK279-8TZM ) November. 14, 2007 Author : DTV Research Lab D1 Group 1/12...
- Page 2 Front & Rear Panel Specification [ Front Panel Layout ] [ Rear Panel Layout ] External AC Accessory Component Ethernet SATA Outlet Cable Out SPDIF (loop-through) (Optical) Audio (L/R) HDMI iEEE-1394 S-Video AC Inlet Composite Cable In 2/12...
- Page 3 FCC Rules NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 4: Remote Controller
Remote Controller Remote Control Lay-out Layout Basic Function + Hot Key Navigation Key Number + Character Input Key Picture in Picture... - Page 5 Remote Controller Remote Control Lay-out * Requirement : ALL Classes of NGSTB's shall be able to receive signal transmitted by Motorola DRC800 and Philips RC1445301 remote controls and correctly interpret the IR code transmitted. Remote Control IR Codes REMOTE control Key /IR code Mapping shall conform to the following table: K e y N a m e I R c o d e P O W E R...
- Page 6 New function introduction Feature Description Method Creation of a bidirectional OpenCable HD STB that satisfies OpenCable A standard Interface digital cable broadcast standard Compliant between OpenCable HD using Broadcom Cable Chip HD STB STB and CableCARD (BCM7400) Module that handles CAS. M-CARD UDCP Verification In-Band Channel: Receiving 64/256 Digital cable QAM...
- Page 7 In-home Networking and MR-DVR Through MoCA Entropic’s “c.LINK” enables cable STB with integrated PVR • or cable modem to be a whole-house solution extending PVR & IPTV services to all TVs – Ethernet directly to a PC – No consumer adoption or education issues •...
- Page 8 Operational Concept Cable Head-end (Signal Lab) LGE Native UI App MPEG (In-band) Stream LG STB API MPEG-2 Digital AV Channel Spooler Broadcom STB API Stream converter Modulator PSIP Table Multiplexer PSIP Server Combine OOB SI Table /Splitter Modulator CableCARD Ethernet c.Link...
- Page 9 1. In-band tuner tuned A/V channel Navigation Without a cable card, turn the power on. After the system boots, it will tune to a preset channel like the screen on the left. (Note) The first channel is tuned using saved Channel information from the clear QAM signal that is currently broadcasted from the research lab.
-
Page 10: Using The Menu
2. Basic Set-top Box Functionality Verification using the menu 1) MAIN MENU If the MENU key is pressed, the Menu OSD will be displayed like the screen on the left. (Note) Basic MENU Navigation can be performed using the UP, DOWN, LEFT, RIGHT and SELECT (OK) keys. - Page 11 3. Display Menu 1) DISPLAY This screen is displaying the Display menu items. The Display menu items provides various menus to control or change display settings. If the SELECT (OK) or RIGHT key is pressed, the focus will shift to the Display menu OSD. 2) DISPLAY This screen is showing the menu where the key focus has been moved to the Display item.
- Page 12 3. Display Menu 4) DISPLAY -> Screen ARC Change input video’s aspect ratio. Menu Item • Full – Display full screen irregardless of input video format. • Box – Display Letter Box or Pillar Box. • Crop – Display Pan Scan or Zoom. (note) In the case of Live TV the remote control’s ASPECT key can also be used.
- Page 13 3. Display Menu 6) DISPLAY -> PIP Size Set PIP size. Menu Item : Big, Normal, Small (note) To see actual PIP, press the remote control’s PIP key during Live TV. 6) DISPLAY -> PIP Position Set PIP position. Menu Item : Bottom Right, Top Right (note) Press remote control’s PIP MOVE key during Live TV.
-
Page 14: Audio Menu
4. Audio Menu 1) AUDIO This screen is displaying the Audio menu items. The Audio menu items provides various menus to control or change audio settings. If the SELECT (OK) or RIGHT key is pressed, the focus will shift to the Audio menu OSD. 2) AUDIO ->... - Page 15 5. NVRAM Reset Menu 1) NVRAM RESET This screen is displaying the NVRAM Reset menu items. If the SELECT (OK) or RIGHT key is pressed at this menu, the NVRAM will initialize. (note) If this menu is launched, all settings will revert back to default.
- Page 16 6. PVR Test 1) If the RECORD key is pressed during a viewing, recording will start and the OSD will be displayed on the screen. Press the STOP key to stop (end) the recording. 2) If the PLAY key is pressed during a viewing, the most current recorded program will be played.
- Page 17 6. PVR Test 4) After selecting a program from the list and pressing the ENTER key, a popup menu will appear to allow “Play”, “Delete” or “Cancel”. If “Play” is selected, the selected program will be played. If “Delete” is selected, the selected program will be deleted.
- Page 18 7. PIP Test 1) If the PIP key is pressed, PIP can be turned on or off. If PIP is turned on, the last viewed channel or the first channel will be displayed. (note) PIP size can be adjusted at the PIP Size menu.
- Page 19 8. Volume Control Test 1) The Set-top Box’s volume can be adjusted using the VOL UP or VOL DOWN key. 2) If the MUTE key is pressed, Audio output will be blocked. (note) At this time, if the VOL UP or VOL DOWN key is pressed, the volume will revert back to the previous setting.
- Page 20 9. DLNA Test 1) If the VOD key is pressed during a viewing, the DLNA test screen will appear. (note) Audio/video decoding will be stopped upon loading of the DLNA screen. (note) For DLNA related detailed test scenario, please refer to the relevant document. 2) At anytime during the DLNA test, press the VOD key again or select TV from the menu to go back to TV viewing mode.