Related Manuals for Tanova TBT30-212
Summary of Contents for Tanova TBT30-212
- Page 1 Your Handy Step By Step Installation Guide For Models TBT30-210 TBT30-212 For further assistance in New Zealand www.tanova.co.nz 0800 852 258 For further assistance in Australia www.tanova.com.au 1300 123 700...
-
Page 2: Parts Check List
Tanova TBT Series Installation Space Required for Installation Model TBT30-210 TBT30-212 Parts Check List Identify parts shown in images and screw pack components listed below. • 20 x 8g x 15mm pan head screws for fixing top cover into cabinet •... - Page 3 With your cabinet on its side (fig1) mark fixing positions with a pencil (see page 8). Using a 5.0mm drill pre-drill the runner Fig. 1 fixing holes. Fig. 2...
- Page 4 With cabinet upside down, fix top cover frame into cabinet as demonstrated in (fig 3). Front edge of top cover to be 3.0mm from front cabinet edge. Use the Fig. 3 8g x 15mm pan head screws supplied and screw to cabinet to before fixing to the sides.
- Page 5 Using the dimensions shown in (fig 6), mark and fit the front connectors and gallery rail end plugs. Model TBT30-210 TBT30-212 Fig. 6 Marking jig codes: • RMD.91230 Drawer front connector marking jig • RMD.92130N Gallery rail marking jig •...
- Page 6 Adjust drawer front as indicated below. Drawer Insertion Drawer Removal Drawer Front - Height and Tilt Adjustment...
- Page 7 Once drawer front is adjusted fit the cover caps as shown inserting the front tabs first and clipping it into place. Fig. 11 Fixing points for extra strength To increase stability lock off drawer front using two pan head screws and fix through two support points shown in (fig 12).
- Page 8 CABINET FRONT EDGE...