Download Print this page

SEANY H-1600 User Manual

Hide thumbs

User Manual

H-1600

Read and save these instructions

SEANY TECHNOLOGY (HK) LIMITED

GUANGZHOU SEANY STAGE LIGHTING EQUIPMENT CO.,LTD

Introduction

Thank you for having chosen our company's haze machine. For your own safety, please

read this user manual carefully before installing the device. By following the suggestions

found in this manual, you can look forward to the reliable and satisfactory performance

of your haze machine for years to come.

Table of Contents

Need help?

Do you have a question about the H-1600 and is the answer not in the manual?

Questions and answers

Summary of Contents for SEANY H-1600

Page 1 H-1600 Read and save these instructions SEANY TECHNOLOGY (HK) LIMITED GUANGZHOU SEANY STAGE LIGHTING EQUIPMENT CO.,LTD Introduction Thank you for having chosen our company's haze machine. For your own safety, please read this user manual carefully before installing the device. By following the suggestions found in this manual, you can look forward to the reliable and satisfactory performance of your haze machine for years to come.
Page 2 Specifications Model: H-1600 Voltage : 220V-240V, 50Hz / 60Hz Power : 1600W Warm-up time : 2 mins Output(approx) : 400M /min Tank capacity : 2.50L Gross weight: 12.5 Kgs Packaging Volume (mm): 630*350*330 CAUTION Danger of electric shock: ·Keep this device dry. For indoor use only.
Page 3 UNPACKING & INSPECTION Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact. Included with your H-1600 haze machine should be the following items: 1. This user manual. 2. Power cord.
Page 4 1. Please connect the 10 M LCD wired multi-function remote control with 5-pin XLR connector for Seany Haze Machine, then the LCD display of controller will show "warming up! ”, the heating time keep moving any time, here the fog machine is in warming status.
Page 5 as 1. · The machine of set DMX512 signal , the connection can be finished by means of input and output of the triple XLR socket. The output of the control signal line must be corresponding to the grounding wire of the LXR socket, and the lengths of the 2(-) and 3(+) signal lines should be within 100M, prevent them might disturb other electric appliances.