Summary of Contents for Sepnine 8007T
- Page 1 Bicycle Cargo Trailer Instruction Manual 1. Trailer Components: 2. Installation step: 1).Take out the package content from carton and make sure each part are available as above showing photo. 2).Unfold the folding frame as below image direction:...
- Page 2 3).Install the wheel: Please press the wheel button cover and then insert the wheel into the wheel tube as below images, please make sure the wheel locked in safety. 4).Install the bag: Please install the bag as below images: Make sure the bag locked in safety.
- Page 3 5).Connect trailer with bicycle: Press the red button and then unfold the tow bar as following images: Install the connect adapter under the bicycle seat post: Secure the saddle-support mounting with the help of the plastic shims to the seat post of your bicycle. Now use the M8x50mm screw that is ready-fitted to the saddle support mounting to attach the ball-head coupling to the saddle support mounting.
- Page 4 3. Use the belt: Please use the belt as following image: The belt locked step same as locked the bag, make sure the belt fasten tight and safety. 4. Use the trailer by hand:...
- Page 5 5. Safety Instructions: Congratulations on purchasing our bicycle shopping trailer. Please follow the instructions in this manual before use and keep it for future reference. Warning! Failure to follow the instructions herein may cause danger or serious consequence. 1).Make sure that the cycle is suitable for towing the bicycle trailer with reference to the cycle manufacturer’s instructions.
Need help?
Do you have a question about the 8007T and is the answer not in the manual?
Questions and answers
how do you attach the extention
To attach the extension for Sepnine part number 8007T:
1. Press the red button and unfold the tow bar.
2. Install the connect adapter under the bicycle seat post.
3. Secure the saddle-support mounting using plastic shims to fit the seat post.
4. Use the pre-installed M8x50mm screw to attach the ball-head coupling to the saddle-support mounting.
5. Pull the safety catch on the ball-head coupling forward and attach the ball coupling.
6. Tighten the securing screw to hold the coupling in place.
This answer is automatically generated