Set-Up; Connection Methods - Pyramat Sound Rocker S 2000 Owner's Manual

SET-UP

1
Unfold the top portion of the
Sound Rocker until the backrest
is fl ush with the seat portion.
4
Twist the volume knob to click
on the power.

CONNECTION METHODS

MP3 and Portable CD Player Connection
1
Turn the source knob on the
control panel to MP3.
2
Place the Sound Rocker so
that the control panel is less than
11 ft./3.5 meters from the power
source.
5
Check the speakers on top to
see if the Pyramat logo is lit up.
Twist volume knob to power off the
Sound Rocker, then proceed to the
connection method shown below
for your audio/video device.
2
Slip your player into the MP3
pocket on the side of the Sound
Rocker.
3
Connect the 12-volt AC power
adapter to the electrical outlet and
then to the power AC port on the
control panel.
3
With the cord next to the
pocket, connect the player to the
Sound Rocker.
Note: For audio devices with a
smaller input jack, use the supplied
2.5 mm mini plug adapter.
3
CAUTION:
Keep
fi ngers clear of the folding seam
when folding or unfolding the
rocker.
CAUTION:
Power
off all audio/video devices prior to
proceeding with the Sound Rocker
connection method.