Download
Share
Print this page
  1. Manuals
  2. Brands
  3. La Joie Manuals
  4. Bicycle Accessories
  5. ZKI-BT
  6. Instruction

La Joie ZKI-BT Instruction

Bike trailer
Hide thumbs

Advertisement

Quick Links

Download this manual
BIKE TRAILER

Advertisement

loading

Summary of Contents for La Joie ZKI-BT

  • Page 1 BIKE TRAILER...

  • Page 2: Safety Instructions

    Safety Instructions IMPORTANT Read follow these instructions safety rules before operating the Confidence Baby Jogger. • WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. • Immediately discard all plastic bags and plastic wrapping materials. •...
  • Page 3 Long Rear Axle Model Parts List Parts Number Part Name Quantity Trailer Rear Wheel Front Wheel Wheel Protector Flag Front Fork Rear Axle（normal model） Tow Bar Cross Bar Manual Tool Bag Please Note:Long Rear Axle system assembling according to Step 3A Rear Quick Release Model Parts List Parts Number Part Name...

  • Page 4: Assembly Instructions

    Assembly Instructions 1. Remove the Bike Trailer from the carton and check the contents against the parts list. 2. Unfold the Bike Trailer frame and remove all the components from the inside (Fig 2). 3. Lift both side panels into an upright position (Fig 3). Remove the screws from the crossbar by turning it in a counter-clockwise direction and slide the back of the seat over the crossbar.
  • Page 5 (Fig 4) (Fig 5) Step 2 – Release the tow bar 1. Open the loop of the quick release pin and remove the pin. 2. Re-install the pin in the front holes of the U – channel and close the snap pin so the loop of the pin lock is over the pin shaft (Fig 8).
  • Page 6 Step 3A – Install the wheels and wheel guard(normal model). 1. Lift the Bike Trailer so the right hand side is up and insert the rear axle (Fig 9). 2. Slide the spacer on and then put the rear wheel on (Fig 10). (Fig 9) (Fig 10) (Fig 11)
  • Page 7 3. Repeat for the left hand side. 4. Now, whilst holding one side with a wrench, tighten the opposite side and then repeat process for other side. (Fig 11) 5. Install the wheel guards by depressing the spring pin and insert the tube in the frame until the spring locks back into place.
  • Page 8 Note: The Four Season cover is designed to keep passengers and cargo dry and warm in inclement weather. It also protects children from flying debris . The Four Season cover can be rolled up to allow for added ventilation in hot weather. Velcro closures keep the Four Season Cover in place when rolled up.
  • Page 9 2. Insert inner axle shaft. Shaft will slide through the outer axle shaft from one side to the other and extend past fork. It fork lock clamp and washers and then attach inner axle rod nut. (Fig 16) (Fig 17) Warning: You cannot tighten the quick release lever by merely twisting it.
  • Page 10 (Fig 20) (Fig 21) 3. Tighten the axle nut securely, testing to see if the hitch can be pulled loose (Fig 21) and then repeat safety test. 4. Loop safety strap around the frame and secure to the D ring on the hitch arm (Fig 22).
  • Page 11 Seat for one child Undo the lap buckle and seat the child in the centre of the the Bike Trailer. Buckle the left belt over the childs lap and pull the strap until the belt is snug. Place the two centre shoulder straps over the childs shoulders and clip both straps into the D ring of the centre of the crotch strap.

  • Page 12: Folding And Storage

    Folding and Storage 1. Unclip the tow bar safety strap from the D ring and remove the pin and hitch from the bike frame. 2. Clip the end of the strap back onto the tow bar D ring. 3. Remove the flag and pole and separate into 3 sections. 4.