3. Using the scanning tool in the Selection menu find an available open frequency. If multiple wireless systems are in use, make certain to keep frequencies least 400 kHz apart. 4. Connect the audio output from channel 1, channel 2, or both to an audio input on a mixer, recorder, camera, or PA system.
Powering Menu Control and Menu Selections The A10-TX-US is powered by two AA (LR6) batteries. For the longest runtime use Lithium pri- The A10-TX-US transmitter is controlled through its menu. Enter the menu via the centre Menu mary cells. The transmitter also accepts alkaline primary and Nickel Metal Hydride rechargeable button.
Sets the brightness of the OLED screen Five increments, 1–5, 5 is brightest to 608 MHz. There are two models of the A10-TX-US transmitter to cover this frequency range. Multiple A10 Digital Wireless systems can be used simultaneously on nearby adjacent frequen- Battery Type For accurate display of battery condition on the •...
Balanced microphones, including phantom powered shotgun microphones, can be connected to the A10-TX-US. 12 V and 48 V phantom power are available for microphones requiring it. For microphones that can properly operate on 12 V phantom, such as the Schoeps CMIT, select 12 V phantom to significantly increase battery runtime.
Audio Ltd. issues new firmware for the A10-TX-US transmitter to change and introduce new the Selection Menu before connecting an audio source. features to the unit. Make certain to register your Audio Ltd. product at the Audio Ltd. website to LEMO Connection receive firmware update notifications.
501 501.4 501.8 502.2 502.6 503 503.4 503.8 504.2 504.6 505 505.4 505.8 A10-TX-US transmitters available for sale in the U. S. can tune over a switching bandwidth of up 506.2 506.6 507 507.4 507.8 508.2 508.6 509 509.4 509.8 510.2 510.6 511 511.4 511.8...
Need help?
Do you have a question about the A10-TX-US and is the answer not in the manual?
Questions and answers