SmartThings F-ADT-PIR-1 Setup Manual page 2

Setup
A
1. Take the ADT Motion Detector to where you intend
to mount it after setup.
• Make sure you are within 350 feet from the
ADT Security Hub. (Exact range depends on
your home's construction, the environment, the
position of the ADT Security Hub, and the position
and number of other connected devices.)
• Make sure that your ADT Security Hub is disarmed
before connecting a new device.
• Make sure that you only setup one new device
at a time.
2. Use the SmartThings app on your smartphone
to select the "My Home" tab. Select "Things", and
then "Add a Thing".
3. Remove the tab on the detector marked "Pull
This Tab".
• Do not remove the tab until you are ready to
setup the detector.
Walk Test Button
Setup
Battery Tab