Summary of Contents for Pointman NL200U
- Page 2 Names of Parts Front Cover Lock NL200 (Dual-sided Printing) Button Control & Menu NL200H (Dual-sided printing, Card Input Hopper) Buttons NL200U (Upper Single-sided Printing) Pass Mode NL200L (Lower Single-sided Printing) Lamination Temperature (Temper_set) Open Front Cover Film Position (Start POS set)
-
Page 3: Safety Precautions
Indicates a potentially hazardous situation which may result in electric shock. ③ Interface Fire Hazard Warranty Certificate Indicates a potentially hazardous situation which may result in fire. Regulatory High Temperature Indicates a warning about high temperatures. ©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual... - Page 4 Do not remove any cover or protective device that is attached with screws. Do not operate the printer while your hand is placed inside. Clean and maintain the printer according to the user instructions. ©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual...
-
Page 5: Getting Started
Getting Started - In the Box -Product Overview Thank you for purchasing POINTMAN LAMINATOR. This laminator is designed to laminate PVC cards of your specifications by applying special films on Single and Dual sides using halogen heat to prevent duplication. - Page 6 Insert the cards to be laminated. Menu Button (press once: enter, press once on the menu: exit) RJ11 Port Used for connecting to a NUVIA card printer. (communication port) ©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual...
- Page 7 (press once: enter, press once on the menu: exit) Card Input hopper Lock Used to lock the card Input hopper for Security RJ11 Port Used for connecting to a NUVIA card printer. (communication port) ©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual...
- Page 8 -NL200U (Upper Single-sided Printing) Name Description Name Description Front Cover Button Opens the Front Cover. USB Port Used to connect the laminator and other devices using the USB cable. Front Cover Opens the cover to replace the Film and Cleaning Roller.
- Page 9 Insert the cards to be laminated. Menu Button (press once: enter, press once on the menu: exit) RJ11 Port Used for connecting to a NUVIA card printer. (communication port) ©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual...
- Page 10 - If the Front Cover is not closed completely, the LCD Display Panel indicates pull the cover by the handle to the message: “COVER OPEN”. open it completely. ©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual...
- Page 11 2. Align the Cleaning Roller with its hole and push it down until it clicks. Important Cleaning roller hole - Make sure that it is fully inserted into the Cleaning Roller Hole before pushing the indicated area. After installation of cleaning roller ©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual...
- Page 12 - Do not force the film core in as it can damage the cartridge. RFID Tag - Check the position of the RFID tag. RFID Tag Reader ©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual...
Need help?
Do you have a question about the NL200U and is the answer not in the manual?
Questions and answers