Amac Tek HAN-320 Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Information in this document is subject to change without notice and represent a commitment on the part of AMAC

TEK CO., LTD. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, for any purpose without the written permission of AMAC TEK CO.,

LTD. The software described in this document is furnished under a license agreement and may be used or copied

only in accordance with the terms of th e license agreement. It is agreement the law to copy the software on any

other medium except as specifically allowed in the license agreement. The licensee may make one copy of the

software for backup purpose.

FCC Information

This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiates radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio Communications, However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

unacceptable interference to radio or television reception, which can be determined by turning the equipment off and

on , the user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced Radio/TV

technician for help

Table of Contents

Need help?

Do you have a question about the HAN-320 and is the answer not in the manual?

Questions and answers

Summary of Contents for Amac Tek HAN-320

Page 1: Fcc Information
TEK CO., LTD. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of AMAC TEK CO., LTD. The software described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of th e license agreement.
Page 2 Certificated Of Conformity 1. Company : AMAC TEK CO., LTD 3rd Floor, Seyo Bldg, 161-8, Samsung -Dong, Kangnam-Gu, Seoul Korea 135-881 2. Model Name : HAN-320 3. FCC Compliance Statement: This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 3: Table Of Contents
Required Software by OS Required Software by OS(Operating System)........05 Software Installation Guide For Additional Functions......06 To Upload/Download To connect to PC................07 To upload/Download the files............07 To format...,,,,,..............09 To disconnect from PC.............10 To listen to MP3/WMA Music Files To listen to Music Power On/Off, Play/Stop............11 To select the Next File or Previous File.........11 To control Volume..............11...
Page 4 To save frequency by Manual............16 To rec ord FM Radio..............16 To set up FM BAND...............17 To set the MODE Major Mode Setting Up..............18 How to enter the detailed MODE Setting Up........18 Additional Functions How to use the UTILITY program............23 Font Download................25 Firmware Upgrading............27 To insert SD(Secure Digital) Card..........29 Other and Trouble Diagnosis...
Page 5 - Users can listen to FM Radio to use preset frequency function by Auto Scan, and the preset frequencies are saved automatically. * Firmware Upgrading The HAN-320 is easily upgraded using the firmware upgrading service through www.amac21.com AMAC TEK CO., LTD. will give notice of the new functions and firmware for upgrading.
Page 6 ■Enclosures ■Player Overview...
Page 7 ■ LCD Display ① Indicates the present played folder and the track number ② Indicates the Selected Area Repeat(A -B) ③ Indicates the memory of the present played file (Internal memory or External SD Card memory) ④ Indicates the title of the present played file ⑤...
Page 8: Required Software By Os(Operating System)
Required Software by OS ■Required Software by OS(Operating System) S/W program installation is not mandatory for all OS users except for WINDOWS 98 users. Therefore, WINDOWS 98 users must install the driver and additional program, and any other users (WINDOWS 2000/ME/XP) install only additional program.
Page 9: To Upload/Download
To Upload/Download * Caution To open the USB Cap, lean downward direction and pull as below pictures.
Page 10: To Connect To Pc
■To connect to PC ① Direct Connection Open the cap of the player and connect USB port to your PC. ② Connection through the USB Cable Use the USB cable provided if the USB port is positioned at the uncomfortable place. ■To Upload/Download the files ①...
Page 11: To Format
③ Uploading is on the contrary of downloading. ④ It will cause the serious problem on the files and internal Flash Memory if you plug-out the player from PC improperly. Please disconnect the player after downloading completely. (Please refer to page #10 [To disconnect from PC]) ⑤...
Page 12: To Disconnect From Pc
■To disconnect from PC Disconnection from PC should be done as following procedures to prevent from file damage. ① Please double click the icon at the bottom of right side as below pictures. ② Select USB device, and click on [STOP]. ③...
Page 13: To Listen To Mp3/Wma Music Files
To listen to MP3 / WMA Music Files ■To listen to music ▶ To turn the power On/Off, Play/Stop The power will be turned on when PLAYBACK(▶Ⅱ) button is pressed over two or more seconds and then press PLAYBACK(▶Ⅱ) button once again to play the music. Press PLAYBACK(▶Ⅱ) button during playback to pause or stop and press again to turn off the power for more than 3 seconds.
Page 14: Fast Search Function
▶ Fast Search Function Press FF(▶▶) / REW(◀◀) button two or more seconds when a file is being played. Then, the previous or the next part in the file will be played. (Fast Search function when MP3 file is being played.) ▶Repeat function for the selected Area (A -B) The desired area can be played repeatedly in the playback file.
Page 15: Equalizer(Eq) Setting Up
The folders consist of each basic folder, and MP3 files are saved in each folder. If the desired file that user wants to listen to is in the other folder, user has to move to that pertinent directory. ※Reference : The Device HAN-320 will display on LCD as below. 1. After formatting There is no change on LCD after the format even though users press FF and REW button.
Page 16: To Move To The Voice, Back_Up Folder, Or Subfolder
3. After using File Copy function in Mode The folder will be created automatically, and all of copied files will be saved in this folder. The root folder consists of VOICE, BACK-UP, and Additional Folders created by users. * <<Config.sys>> file will be created and shown automatically in PC when users set up anything through MODE key.
Page 17: To Record / Encode
To record / encode Please set up MIC. and LINE input as users ’ convenience using the function of MENU when encoding. After select( ) with MENU key, user s can change into the desired recording. When the voice recording is desired, please move the volume button to right and left and select ( ) icon, and when the direct encoding is desired, please select (...
Page 18: To Listen To Fm Radio & Record At The Real Time
To listen to FM Radio & record at the real time Earphone provided should be inserted into the player to receive FM frequency since the earphone works as an antenna. Earphone provided should be inserted into the player to receive FM frequency since the earphone works as an antenna.
Page 19: To Record Fm Radio
■To record FM Radio Users can record the desired FM Radio while listening as follows; Press REC(◎) button while listening to start the recording. Press REC(◎) button again, to stop the recording. (* Notice: FM Radio recording files are saved as RADIO 001 ~ 999 in the VOICE folder.) [To Start Recording] [ To Stop Recording] To set up FM BAND...
Page 20 [Pictures for All MODE Functions] 1. MEMORY -Total Flash Memory Capacity / Free space -SD Card Memory Capacity / Free space (When SD Card is inserted) -No SD Card An actual usable memory in the player is shorter than an original memory because 8~ 9MB is used by the system of the player.
Page 21 3. SAMPLE FREQ Setting Up MPEG MODE SAMPLE FREQUNCE(KHz) MPEG1 layer3 32 → 44.1 → 48 MPEG2 layer3 16 → 22.05 → 24 MPEG2.5 MPEG1 layer2 32 → 44.1 → 48 ADPCM 4. BITRATE Setting MPEG MODE BITRATE(Kbps) MPEG1 layer3 11 Steps in range of 32 ~160 MPEG2 layer3 11 Steps in range of 08 ~112...
Page 22 - Use MENU Key (Jog Key) to select the desired file for copying. - Press PLAYBACK(▶Ⅱ) button to copy and the progressing % is appeared on LCD. - When the file copy is completed, [File Copy OK] is appeared on LCD. - Please repeat again for the additional file copy as above.
Page 23 10. LOW FORMAT It is function of initializing the memory by deleting all data completely and constituting the track and sector. Thus, LOW FORMAT is substantial initializing Flash Memory in the player. The process is the same as the above #9 [FORMAT Memory] 11.
Page 24: How To Use The Utility Program
Additional Functions ■How to use the UTILITY program ▶ TVF file in the player and WAV file in PC Picture(1-1 ) P i c t u r e ( 1 - If users want to record voice with the player as TVF file (low capacity), only the player, not PC, can play TVF file. So, TVF file should be converted to WAV file in PC while connecting the player to PC, and then users can listen to WAV file (converted from TVF) in PC.
Page 25: Font Download
▶ To select WAV file name to save Picture(1-5) Picture(1-6) - Click on [Save WAV] to appoint the place for saving as below [picture 1-5]. Then [Picture 1-6] is appeared. - Select file name and the place to save, then click on [SAVE]. ▶...
Page 26 ※How to Download the Fonts 1. To download, press MODE button more than 2 seconds in the player. 2. Find [Firmware Upgrade] and press PLAYBACK button. Then, [FW UPGRADE] is appeared on LCD. 3. Connect the player to PC and refer to the followings; ▶Pictures when the player is connected to PC Connected Properly Connected Improperly...
Page 27 9. Click on [Font Download] button to start the downloading as shown on Picture 2-5. 10. Press [Confirm] button after finished Font Download as Picture 2-7. The program has to be restarted after the Font Downloading, and Re-Try the HAN-320 Plug-In and Out.
Page 28: Firmware Upgrading
11. Picture 2-6 shows that the downloading is progressing and click on[Yes] to complete. 12. Turn the player power off and turn it on again. ■Firmware Upgrading - The newest firmware is uploaded on website www.amac21.com - Install the newest utility program on PC - Turn the player on and use MODE button to enter [FW UPGRADE], then press PLAYBACK button.
Page 29 Click on [Firmware Upgrade] as shown on Picture 3-3 and select firmware file as shown on Picture 3-4. Picture(3-5) Removing Old Firmware Picture(3-6) Downloading New Firmware The old firmware is being removed as shown on Picture 3-5. - The new firmware is being downloaded as shown on Picture 3-6 - Click on [Yes] to complete.
Page 30: To Insert Sd(Secure Digital) Card
■ To insert SD(Secure Digital) CARD Users can add SD Card to expand the memory capacity and back up data. ① Please insert SD Card into the player as below the picture. ② Turn the player power on, then the SD Card icon is appeared on the top right corner of LCD after SD Card is inserted.
Page 31: How To Troubleshoot
5. The player should be kept in areas free from extreme temperature changes, moisture and dust.(Do not leave the player over 35℃ and below 5℃) 6. If the player stops running under proper operation, please reset it by taking out battery. 7.