1. Manuals
  2. Brands
  3. Securitron Manuals
  4. Door Opening System
  5. MXD-62
  6. Installation and operating instructions manual

Securitron MXD-62 Installation And Operating Instructions Manual

Door movement exit delay
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PN# 500-12800
Rev. A.2, 6/00
SECURITRON MODEL MXD-32, MXD-62 DOOR MOVEMENT EXIT DELAY

1. DESCRIPTION

The MXD consists of several components which, when combined with a Magnalock, will
produce an initiate signal for delayed exit as controlled by Securitron's XDT logic timer when
a person pushes on the door and moves it a modest distance.
The specific components within the MXD "kit" are:
A mounting sub-plate which affixes the magnet body to the door frame or header.
A sealed proximity switch array which is also mounted on the sub-plate. This changes state
to provide the initiate signal.
A stamped, stainless steel housing which covers the magnet body and proximity switch array.
A sealed permanent magnet affixed to a bracket that mounts behind the strike plate. As this
unit moves away from the proximity array, the array switches.
A special sex bolt with internal spring that permits the door to move away from the strike
plate (the strike plate remains secured to the magnet body) so as to create the initiate signal
when a person pushes on the door opening it up to one inch.
 Copyright, 2000, all rights reserved • Securitron Magnalock Corp., 550 Vista Blvd., Sparks NV 89434, USA
Tel: (775) 355-5625 • (800) MAGLOCK • Fax: (775) 355-5636 • Website: www.securitron.com
An ASSA ABLOY Group company
INSTALLATION AND OPERATING INSTRUCTIONS
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MXD-62 and is the answer not in the manual?

Questions and answers

Summary of Contents for Securitron MXD-62

  • Page 1  Copyright, 2000, all rights reserved • Securitron Magnalock Corp., 550 Vista Blvd., Sparks NV 89434, USA Tel: (775) 355-5625 • (800) MAGLOCK • Fax: (775) 355-5636 • Website: www.securitron.com...
  • Page 2 Rev. A.2, 6/00 Page- 2 Use of the MXD permits delayed exit without the need to alter the existing door latch and hardware. The relatively large door movement that it supports (up to one inch) eliminates the potential problem of false triggering if the door is rattled or subjected to wind loads. It is also highly tamper resistant in the event that someone would wish to defeat its safety function of allowing people to exit.
  • Page 3 The MXD sex bolt is dimensioned to precisely fit a 1 3/4” (44.5 MM) thick door which is a common size. If the door is a different thickness, contact the factory. Securitron can supply washers for a thinner door, which go under the head and key in to the anti-rotation pins while including new anti-rotation pins.
  • Page 4 THREAD-LOCK WHITE PLASTIC FLAT BUSHING BUSHINGS WASHER NOTE: MXD-62 IS SHOWN. MXD 32 PERMANENT MAGNET FOLLOWS THE SAME CONCEPT BUT BRACKET IS PHYSICALLY SMALLER. 2.5 MOUNTING THE SUB-PLATE Using the template, you should have previously marked and drilled mounting holes for the sub- plate.
  • Page 5 3. WIRING THE MXD The sole purpose of the MXD is to send an initiate signal to Securitron’s model XDT delayed exit logic timer. The signal is furnished from the two flying leads attached to the proximity switch array on the sub-plate.
  • Page 6 The movement stroke can be reduced by loosening the screws that hold the proximity switch array to the sub-plate and sliding the array farther from the door. Securitron recommends that this be done only in special situations. Examples would be if the door will not physically move far enough to reliably initiate delay without reducing the stroke because the door is thicker than 1 3/4”...
  • Page 7 SECURITRON. SECURITRON will use its best efforts to ship a replacement product by next day air freight at no cost to the customer within 24 hours of SECURITRON’s receipt of the product from customer. If the customer has an account with SECURITRON or a valid credit card, the customer may order an advance replacement product, whereby SECURITRON will charge the customer’s account for the price of the product plus next day air freight, and will...
  • Page 8 Securitron model MXD-32/62 door movement hardware. MXDspc.doc Rev. 5/99 SECURITRON MAGNALOCK CORP., 550 Vista Blvd., Sparks NV 89434 USA Tel: (775) 355-5625 (800) MAGLOCK Fax: Mkt. (775) 355-5636, Fax: Admin. (775) 355-5633 Website: www.securitron.com E-mail: info@ s ecuritron.com...

This manual is also suitable for:

Mxd-32

Table of Contents