Willis SYLVANIA One Plug Tree V66362-60 Instruction Manual

9' warm white /multi led color changing

Advertisement

9' Warm White /Multi LED Color Changing
One Plug Tree V66362-60
Thank you for purchasing a SYLVANIA™ Pre-lighted Tree. This tree assembles in minutes
and is decorated with energy saving LED light sets. This tree has 8 lighting options,
Warm White, Flashing Warm White, Slow Fade Warm White, Steady Multicolor, Flashing
Multicolor, Slow Fade Multicolor, Sequential Multicolor & Warm White, Slow Fade
Multicolor & Warm White. These functions can be changed by using the foot pedal. Please
refer to Step 10 of the assembly instructions.
FOR INDOOR/SEASONAL USE ONLY
This tree has been carefully constructed to insure many years of safe, seasonal use. In the
unlikely event that you experience problems with the tree please call our customer service
hotline at (800) 414-3434. Agents are on call 24/7 to answer your questions. Do not return
this tree to the place of purchase. Please provide the item number of the product purchased as
well as information pertaining to the nature and description of the problem. The item number
for your tree is shown above and can also be found below the UPC sticker on the tree box and
also on a sticker placed on the trunk of the tree, right above where the trunk enters the tree
stand. Please have this number available before you call. Please do not remove this
identification sticker.
This product carries a 3 year limited guarantee. This guarantee does not cover damage
resulting from accident, misuse, abuse, negligence, or normal wear and any discoloration.
The warranty is in force from the date that you purchased this tree. There is no need to
register your purchase, however it is most important that you retain original sales receipt as
proof of purchase. Receipt may be required for warranty service. Please note this warranty is
non-transferable and is voided if the product is not used as intended. Please keep this product
manual for future reference.
This 9' tree is pre-strung with 1000 3.0 volt, 0.06 watt LED lights:
CARTON INCLUDES:
 4 Pre-lighted tree sections (A-Top Section, B – Upper Middle Section, C –Lower
Middle Section, and D - Bottom Section.)
 1 Sturdy metal tree stand
 1 Screw for tree stand
 1 power supply cord with foot pedal switch
 8 extra 3.0 V replacement bulbs
 2 spare replacement fuse (3 A) for power supply cord plug
INSTRUCTION MANUAL
Steady

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SYLVANIA One Plug Tree V66362-60 and is the answer not in the manual?

Questions and answers

Karen Rosebush
February 2, 2025

lights constantly blinking. Sometimes when step on foot pedal will change to color or phasing but not constant on. Replaced fuse. Want to try replacing power cord with foot pedal. How can I get one?

1 comments:
Mr. Anderson
February 10, 2025

To obtain a replacement power cord with foot pedal for the Willis SYLVANIA One Plug Tree V66362-60, contact the customer service hotline at (800) 414-3434. Agents are available 24/7 to assist you. Provide the item number of the tree and details about the replacement needed. Do not return the tree to the place of purchase.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for Willis SYLVANIA One Plug Tree V66362-60

  • Page 1 9' Warm White /Multi LED Color Changing One Plug Tree V66362-60 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA™ Pre-lighted Tree. This tree assembles in minutes and is decorated with energy saving LED light sets. This tree has 8 lighting options, Steady Warm White, Flashing Warm White, Slow Fade Warm White, Steady Multicolor, Flashing Multicolor, Slow Fade Multicolor, Sequential Multicolor &...
  • Page 2 CAUTION! – ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE BEFORE ASSEMBLING OR DISASSEMBLING. ASSEMBLY: Note: Before you start to assemble your tree please choose a location near an electrical wall outlet. Place the tree stand on a level surface. Please remove protective covers from the base of the pole for each tree section before assembling.
  • Page 3 TREE SHAPING: 1. Allow the branches to fall into place or gently pull branches up and out. When adjusting branches be sure that all wires are free of branch hinges as illustrated in Figure 6. Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left and one at the center of the main stem as illustrated in Figure 7.
  • Page 4 FUSE REPLACEMENT: A) Fuse replacement of power cord (E) (replaceable 3 amp, 125 volt fuse is located in spare parts bag): This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: (Inspect product carefully before using or re-using): a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b) Do not use this product outdoors. c) This seasonal use product is not intended for permanent installation or use. d) Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
  • Page 6 However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

Table of Contents

Save PDF