Page 1
DURA-BOUNCE TRAMPOLINE LADDER MODEL# 9300TL PRODUCT MANUAL - VERSION 01.18.02 FOR AGES: WEIGHT LIMIT: 100 Kgs ADULT(S) NEEDED: TOOLS NEEDED: WARNING/ADVERTENCIA CUSTOMER SERVICE • The contents of this package are not suitable • Trampolines are not for children under 6 GQBrands.com...
CUSTOMER SERVICE INFORMATION Thank you for purchasing: DURA-BOUNCE TRAMPOLINE LADDER MODEL# 9300TL At Global Quality Brands®, we want all of our customers to be To order these parts, or if you have any other questions or concerns completely satisfied with their purchase. Please take time to review...
TO USE. ALL MERCHANDISE IS SOLD ON THIS CONDITION, WHICH NO products are not covered by the product warranty. No other warranty REPRESENTATIVE OF GQ BRANDS® CAN WAIVE OR CHANGE. beyond that specifically set forth above is authorized by GQBrands®. MODEL# 9300TL...
WARNINGS IMPORTANT MESSAGE WARNING - PLEASE READ ADULT ASSEMBLY REQUIRED CHOKING HAZARD - Small Parts NOT for children under 3 years of age. WARNING: While every attempt is made to ensure the highest degree of protection in all equipment, we cannot guarantee freedom from injury. The user assumes all risks of injury due to use.
Page 5
• DO NOT allow other persons to climb on, go under, sit, stand or hang from the • Children under 6 are not recommended to ladder while the trampoline is in use. use trampoline. MODEL# 9300TL...
Page 6
PARTS LIST Part # Description Part# Description 60mm Screw L-Shaped Pole - Male Screw Nut L-Shaped Pole - Female 10mm Screw Step Foam Tube Pole with Coated Flat Hook GQBrands.com CustomerService@GQBrands.com 1-866-498-5269...
Page 7
Slide the Foam Tube (Part 4) into the bottom part of the L-Shaped Pole - Female (Part 6). B. Tightly push together the bottom part of the L-Shaped Pole - Male (Part 5) into the bottom part of the L-Shaped Pole - Female (Part 6). MODEL# 9300TL...
Page 8
ASSEMBLY INSTRUCTIONS STEP 2: Locate: x1 Step (Part 7) Slide the Step (Part 7) from the top of the Poles until it reaches and aligns to the bottom openings. NOTE: Make sure that the top part of the Step is facing upwards. It will be made up of a geometric pattern and be completely flat.
Page 9
B. Align all openings from the Step & Pole. Insert x1 60mm Screw (Part 1) and tighten with a Phillips Screwdriver. Hold on to the Screw Nut on the opposite side to avoid that it falls as you tighten the Screw. MODEL# 9300TL...
Page 10
ASSEMBLY INSTRUCTIONS STEP6: Locate: x2 10mm Screw (Part 3) x2 Pole with Coated Flat Hook (Pa A. Slide x1Pole with Coated Flat Hook (Part 8) on to the upper part of the L-Shaped Pole. B. Align both openings from the poles. With a Phillips Screwdriver, tighten 1x 10mm Screw (Part 3).
Page 11
Frame Pad of your Dura-Bounce Trampoline. NOTE: If you have an Enclosure Net, Make sure to locate the zipper entrance and place the Dura-Bounce Trampoline Ladder in front of it, this will make it easier to enter the trampoline safely. MODEL# 9300TL...
FREQUENTLY ASKED QUESTIONS • Question: “The Hooks of the ladder are in • Question: “One of the parts in my product the opposite side?” Or “I am ale to hook is damaged, how do I replace it?” to the trampoline but the steps are not flat when inclined Answer: If you are still within your warranty period (90 days from initial...
Need help?
Do you have a question about the 9300TL and is the answer not in the manual?
Questions and answers