Alesis HD24XR User Manual page 3

Setting Location Points
Looping
Looping cycles the HD24 between any two of the 25 location points... as long as the
"Loop Start" time preceedes the "Loop End" time. Setting the "Loop Start" and
"Loop End" points is done using the alphanumeric display, the "Locate Select" key
and the "Cursor Arrow" keys.
Setting Loop Points
Make the "Location Point" you want to be the "Loop Start" active in
the alphanumeric display by hitting "Locate Select" and scrolling with
the  cursor keys. Next, HOLD "Locate Select" and tap the left
cursor key. A "Start" indicator will turn on in the Locate Pt window. Use the
 cursor keys again to find the "L ocation Point" you want to use for
the "Loop End". Next, HOLD "Locate Select" and tap the left cursor
key. A "End" indicator will turn on in the Locate Pt window.
Activating the Loop
Select "Auto Return" and "Auto Play" to activate the loop cycle.
Berklee College of Music MP241 Mix 1 /Using Alesis HD24XR
Created by JAL 9/3/07
Using the Alesis HD24XR
Active or current
"Locate Point"
"Locate 0"
"Set Locate"
Dedicated locate keys
1-6
"LOCATE" key
Page 3 of 4