Table of Contents
Advertisement
INSTALLATION OF TWO OR MORE CABINETS OF THE SAME TYPE
ATTENTION!
If two or more vanity cabinets are installed next to each other
there will be a visible seam between vanity tops and between vanity cabinets.
If two or more of drawer base cabinets are
installed next to each other a slicone layer must
be applied between adjacenets sides of the
cabinets' countertops.
Example:
Two drawer base vanity cabinets are
installed next to each other. A silicone must be
aplied on one inner side of one of the cabinet's
countertop before connecting them together.
See Figure 7
If two or more of sink base cabinets are
installed next to each other a slicone layer must
be applied between adjacenets sides of the
cabinets' vanity tops.
Example:
Two sink base vanity cabinets are
installed next to each other. A silicone must be
aplied on one inner side of one of the cabinet's
vanity tops before connecting them together.
See Figure 8
Important (double vanity sink cabinet installation):
When two sink base cabinets are installed next
to each other, each of the vanity tops must be
pulled towards the oposite, from center, side
and aligned with the side of the cabinets so
there will be no gap between cabinets after
installation. Install both vanity cabinets
side-by-side and make sure that the inner sides
are flush to each other.
Figure 9
See Figure 9
www.lesscare.com
VANITY CABINET + VANITY TOP + MIRROR
INSTALLATION STEPS
Figure 7
Figure 8
LV2
VANITY SET:
7
Advertisement
Table of Contents
