Advertisement
Quick Links
Advertisement
Summary of Contents for Zilliontek VeilGuard RF
- Page 1 VeilGuard RF Type Electronic Remote Access Door Lock Owner’s Manual and Installation Guide...
-
Page 2: Product Specification
1. Door Lock – An outing/sleeping mode: It won’t open if someone VeilGuard RF Type Remote Access presses an open button through any crack or hole Electronic Door Lock 2. Remote controller Product Outline - Elders/children can easily open even at night. - In case of lost the key, easy to re-register new one and remove old key (1) Background of Development... - Page 3 • Battery Hour : Min. 1 year Slide battery compartment cover down and insert the four (4) AA Remote distant : avg. 100M batteries. Insure batteries are installed according to the diagram I.D Code method in the battery holder. When the batteries are installed properly, the lock assembly will activate.
- Page 4 Press either the Lock/Unlock Button on the remote. • Remote Control Registration: • Registration of Tele-Cat Control Unit: Press the Remote Control button on the Control Unit. Press the left button above the batteries on the main The unit will display “-“ on the LED and will beep. lock assembly then press the going out/release button Then press either button on the remote you wish to on the control unit...
- Page 5 • Confirmation of Telephone Numbers: From your remote control: Press the “Unlock” button on the remote To confirm the correct telephone number and priority of calling: How to Activate the S.O.S. Alarm: • Press the “Confirmation” button on the control unit. The control •...
- Page 6 • Replace the battery when the light dims significantly Only Tone mode telephone systems can be used to operate the electronic door lock, receive emergency system calls, and to • enter passwords into the control unit. Pulse or rotary telephones Sensor: (Battery –...
- Page 7 Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf ul interference in a residential installation. This equipment generates, use s and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radi o communications.