Summary of Contents for DIAKAT RK-10
- Page 1 Ledařská 8 / 147 00 Praha 4 - Braník / Česká republika http://www.huddy.cz / info@huddy.cz tel: +420 244 461 926 / fax: +420 244 461 927 / Operator’s Manual RK-10 Roofing Saw...
-
Page 2: Table Of Contents
1.4. Hygienic instructions ......................4 1.5. Ecological instructions......................4 1.6. Liquidating the machine at the end of its useful lifetime ........... 4 1.7. Safety instruction for work with RK-10 Roofing Saw............5 2. TECHNICAL DATA AND DESCRIPTION OF THE MACHINE......................5 2.1. -
Page 3: Safety Instructions
RK10 RK10 RK10 RK10S S S S Roofing saw SAFETY INSTRUCTIONS 1.1. General safety instructions 1.1.1 Qualification requirements Persons operating this machine must fulfil the following requirements: 1. The machine may be operated independently only by workers who are: • older than 18- teen years (or as the law in the country of use prescribes) •... -
Page 4: Using The Machine
RK10 RK10 RK10 RK10S S S S Roofing saw 1.14. Using the machine When using the machine the operator must comply with the following instructions: 1. Check the machine before use. 2. Before commencing work check if it is safe to start the machine with out endangering the operator or other persons. -
Page 5: Prohibited Activities
RK10 RK10 RK10 RK10S S S S Roofing saw 1.3. Prohibited activities When using the machine it is forbidden: 1. Using the machine for work other then for which is designed. 2. Operating the machine in other manners then those described in this manual. 3. -
Page 6: Safety Instruction For Work With Rk-10 Roofing Saw
RK10S S S S Roofing saw 1.7. Safety instruction for work with RK-10 Roofing Saw When working with the machine the following instructions must be complied with: 1. It is prohibited to work with the machine with out the tool cover. -
Page 7: Primary Operative Parts Of The Machine
RK10 RK10 RK10 RK10S S S S Roofing saw 2.3. Primary operative parts of the machine Pic. 1 Description of operative parts 1 – Main frame 2 – Engine 3 –Engine cover + air intake cover 4 – V belt cover 5 –... -
Page 8: Before Starting
RK10 RK10 RK10 RK10S S S S Roofing saw BEFORE STARTING 3.1. Visual check up of the machine state Regularly (before commencing work) check: • all covers and safety features (overall state of machine) • inside of the cover (check for fouling) •... -
Page 9: Termination Of Work
RK10 RK10 RK10 RK10S S S S Roofing saw 4.3. Termination of work 1. Stop the engine and shut off the fuel, implement all steps described in the engine manual. 2. Clean the machine including the inside of the tool cover and check the wear of the tool. 3.
Need help?
Do you have a question about the RK-10 and is the answer not in the manual?
Questions and answers