Adjusting The Tone Of A Monochrome Image (Monochrome Color); Adjusting I-Enhance Effects (Effect); Monochrome Color; Effect - Olympus Pen E-PL9 Instruction Manual

Adjusting the tone of a monochrome image ( Monochrome Color)
In the monochrome setting of picture mode (P. 76) settings, you can add and store a
color tint in advance.
1 Press the u button in P/A/S/M modes.
• In B, ART, SCN, and Z modes, the display of the
LV super control panel is controlled via [K Control
2
Settings] (P. 122).
2
Use FGHI to select [Monochrome Color], then
press the Q button.
3 Use HI to choose a value and press the Q
button.
N:Normal
S:Sepia
B:Blue
P:Purple
G:Green
Adjusting i-Enhance effects ( Effect)
You can set the i-Enhance effect strength in picture mode (P. 76).
1
Press the u button in P/A/S/M modes.
• In B, ART, SCN, and Z modes, the display of the
LV super control panel is controlled via [K Control
Settings] (P. 122).
2
Use FGHI to select [Effect], then press the Q
button.
3 Adjust the effect using HI and press the Q
button.
r (Effect: Low)
s (Effect: Standard)
t (Effect: High)
92 EN
Creates a normal black and white image.
Creates a sepia image.
Creates a bluish image.
Creates a purplish image.
Creates a greenish image.
Adds a low i-Enhance effect to images.
Adds an i-Enhance effect between "low" and "high" to images.
Adds a high i-Enhance effect to images.
Picture Mode

Monochrome Color

A ± 0 Monochrome
ISO WB
Auto Auto
G ± 0 S ± 0
S-AF
Normal
F N T
± 0.0
sRGB
S-IS On
FHD
N
60p
M-IS
P
250 250 F5.6
Monochrome Color
Picture Mode

Effect

A ± 0 i-Enhance
ISO WB
Auto Auto
G ± 0 S ± 0
S-AF
± 0 Normal
Standard
± 0.0 sRGB
S-IS On
FHD
N
60p
M-IS
P
250 250 F5.6
Effect
± 0
N
1:02:03
1023
± 0
1:02:03
1023