Kodak Pixpro FZ102 User Manual page 7

Other Safety Notes
Do not disconnect the power or turn the camera off during the update process. Doing
so may cause incorrect data to be written and the camera may not power on later.
When using your camera on an airplane, observe the relevant rules specified by the
airline and FAA regulations.
Due to the limitations of manufacturing technology, the LCD may have a few dead
or bright pixels. These pixels do no effect the quality or performance of the camera,
photos or video.
Do not expose the camera's LCD to water. In a humid environment, only wipe it with a
soft, dry cleaning cloth.
If the LCD screen is damaged, pay particular attention to the liquid crystal in the
screen. If any of the following situations arise, take the recommended immediate
action indicated below:
1. If liquid crystal comes in contact with your skin, please wipe with a clean, dry cloth.
Wash thoroughly with soap and rinse with plenty of clean water.
2. If liquid crystal gets into your eye, flush the eye immediately with plenty of clean
water for at least 15 minutes and then seek medical assistance.
3. If liquid crystal is swallowed, immediately rinse your mouth thoroughly with clean
water and induce vomiting. Seek medical assistance.
6 6