Table of Contents
Related Manuals for Clipcomm HCS-100
Summary of Contents for Clipcomm HCS-100
- Page 1 Bluetooth Stereo Headset HCS-100 User manual...
-
Page 3: Table Of Contents
[Table of Contents] Before use Package contents Description of parts Wearing Charging Low battery Check battery level How to use Power on Power off Pairing Connecting Answering a call Making a call Ending a call Volume control Functions during a call Listening to music Summary of button functions LED indication and signal sound... -
Page 4: Before Use
Before use The Clipcomm HCS-100 is a super lightweight and compact Bluetooth wireless stereo headset producing hi-fi stereo sound and offers crystal clear sound via noise reduction and echo cancellation during a phone call using DSP (digital signal pro- cessing) technology. -
Page 5: Description Of Parts
Before use [Description of parts] Ear loop (Left) Volume controls FWD/RWD Multifunction button Status LED Charging port Microphone (Right) Ear loop... -
Page 6: Wearing
Before use [Wearing] Check the left/right side of the headset and wear it appropriately. Adjust the ear loop to fit in your ear if necessary. Right Left [Charging] Open the cover and insert the charger completely into the ... -
Page 7: Low Battery
Charge your headset until the status LED turns off. The unit will be fully charged in approximately 2.5 h. WARNING : Do not attempt to charge the HCS-100 with any charger other than the one provided. Using another charger may damage or destroy the headset. -
Page 8: How To Use
How to use [Power on] 1. Press and hold for 2 s. 2. You will hear a beep and the blue status LED will briefly flash rapidly for 5 times. [Power off] 1. Press and hold for 5 s. 2. You will hear a beep and the blue status LED will briefly flash rapidly for 5 times. -
Page 9: Connecting
5. When prompted for a passkey, enter 0000. 6. A beep will sound when the devices are paired successfully. The HCS-100 will turn off automatically if it stays in the “pairing mode” for over 3 min without being paired to any device. In this case, you have to reattempt the pairing process (see abovem- entioned steps). - Page 10 1. Connect your HCS-100 with MP3 player. 2. Power off the HCS-100 by pressing for 5 s (The connection will drop with MP3 player). 3. Put your HCS-100 in standby mode and connect/pair to mobile phone by headset/hands-free profiles. 4. Press for once shortly.
- Page 11 3 min, up to 10 min will be required for auto reconnection. Connection with the recently connected device HCS-100 can be connected with the recently connected device as follows. 1. In case of multiconnection Hands-free function: Press for once briefly.
-
Page 12: Answering A Call
How to use [Answering a call] The headset and mobile phone will ring simultaneously when an incoming call is received. You can answer a call by pressing briefly (The call can also be answered using the mobile phone). The music will stop temporarily while music is playing and after call ends, music will be played again. -
Page 13: Ending A Call
How to use Last number redialing * Press and hold for 2 s; this will activate the last number redial feature. Subject to different models of mobile phone, it will show you the recently dialed call list; then, you can press and hold for 2 s again to make a call. -
Page 14: Call Waiting
How to use Call waiting* Answer the second incoming call without ending the first call by pressing for 1 s. To return to the first call, simply press again for 1 s. Call reject* To activate the call reject function, press for 1 s when an incoming call is detected.
Need help?
Do you have a question about the HCS-100 and is the answer not in the manual?
Questions and answers