Timer Programming - JVC LT-32C660 Instruction Manual

Timer Programming

This function is used to perform scheduled recordings or timers (will switch the programme on when it starts).
The recording from timers or direct recording may have a little bit of delay when it starts to record the broadcast programme.
Please make sure the USB device is inserted. If not, a warning message will pop up.
1. Press the MENU button then press the
press OK.
2. Press the to highlight TIMERS then press OK.
3. Press the YELLOW button to add a timer. The ADD TIMER menu will be
displayed.
4. Adding the timer
Press the to select each setting below.
Timer Type Press the
RECORD - Will record a programme
TIMER - Will automatically switch to the selected
programme when it starts.
Channel
Press the
Record Type
Not adjustable.
Date Press the
set the date.
Start
Press the
set the start time.
End Press the
set the end time.
Duration Set automatically.
Repeat Press the
ONCE - DAILY - WEEKLY or just WEEKDAYS.
Change/Delete
Press the
DISALLOWED
ALLOWED - You allow anyone to change or delete the
recording.
DISALLOWED - You will have to enter the PIN code to
change or delete the recording.
Playback Press the
SETTINGS, DISALLOWED or ALLOWED. You will
need to enter the PIN number if you want to play a
recording when you select 'use parental settings and
disallowed' .
LT-32C660/661(A)_IB.indd 29
buttons to select SETTINGS and
buttons to select RECORD or TIMER.
buttons to select the channel.
buttons and the NUMBER buttons to
buttons and the NUMBER buttons to
buttons and the NUMBER buttons to
buttons to set the recording to record
buttons to select ALLOWED or
buttons to select USE PARENTAL
Using the Features
• When the preset time is reached, the
TV will start recording automatically.
• If a programme recording starts
when the TV is in standby mode, the
LED indicator will flash.
5
29
06/09/2016 18:11