Setting The Input Resistance - T+A E-Series 1000 User Manual

Setting the input
impedance
(Impedance)
Miniature switches „2" are used to set the desired input impedance for the
left (2L) and right (2R) channels.
The information you need for this will be included in the manufacturer's
specification for the pick-up system you intend to use.
Select the value which is closest to the manufacturer's stated figure. It is
essential to set the same value for both channels.
If you do not have access to the manufacturer's specification, a good
starting point for input impedance is 100 . This is the factory default
setting.
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
OFF ON OFF
OFF ON ON
ON OFF OFF
ON ON OFF
ON ON ON
21
450 
OFF
200 
ON
130 
OFF
85 
ON
50 
OFF
30 
OFF
20 
OFF
16 
OFF
ON
Input impedance []
650 
...
449 
...
199 
...
129 
...
84 
...
49 
...
29 
...
19 
...
15 
<
Table 4