Transaxle Fluid Change - Husqvarna 967 672501-00 Operator's Manual

LUBRICATION

Transaxle Fluid Change

Hydraulic System, Oil Level
The hydraulic oil and filter must be replaced every
300 hours, and at least once a year. Contact an
authorized service workshop.
Check the oil level in the hydraulic tank daily. The
level shall be about 3/4"-1" (19 - 25 mm) below
the top of the tank.
Check connections, hoses, and tubes for damage
or leaks. Replace or repair if necessary.
Oil and Filters
Oil and filter changes for the hydraulic system
should be carried out by an authorized service
workshop due to the risk of impurities entering the
system.
WARNING! Escaping hydraulic oil
under pressure can have sufficient force to
penetrate the skin, causing serious injury. If
injured by escaping fluid, see a doctor at once.
Serious infection or reaction can develop if
proper medical treatment is not administered
immediately.
IMPORTANT INFORMATION Use minimal
lubrication and remove excess lubricant so that
is does not come into contact with belts or belt
pulley drive surfaces.
29