Advertisement
Quick Links
Advertisement
Related Manuals for Indoor Cycling CBC
Summary of Contents for Indoor Cycling CBC
- Page 1 CBC COMPUTER ELECTRONIC TROUBLESHOOTING...
- Page 3 BOOTLOADER (This errors will appear immediately after power up) ERROR # SHORT DESCRIPTION Error Description Troubleshooting Comments I2C SYSTEM BUS The data communication between the computer and the other system modules could not get Follow Troubleshooting Guide <File Name> established or is disturbed. 1.
- Page 4 ERROR_BAD_FUSES The so called FUSE Bytes of the System Controller are not right programmed. Procedure - Factory Programming Batch for Power Module This error will only occur during production ramp up (changes in R&D) ERROR_BAD_CRC Checksum mismatch between downloaded application and application data located on Power The bootloader will automatically try to fix this issue.
- Page 5 COMPUTER DOES NOT POWER UP WHEN PROVIDING INITIAL RPM SIGNAL...
- Page 6 SCREEN DISPLAYS INSTEAD OF LEVEL % VALUE...
- Page 7 COMPUTER DISPLAYS INSTEAD OF A WATT VALUE...
-
Page 8: Screen Displays
SCREEN DISPLAYS INSTEAD OF LEVEL % VALUE... - Page 9 COMPUTER DISPLAYS INSTEAD OF A WATT VALUE...
- Page 10 AFTER POWER UP, A RED SCREEN WITH A I2C SYSTEM BUS ERROR APPEARS...
- Page 11 BACKLIGHT DOES NOT POWER UP & FRONT LED LIGHT WORKS PROPERLY...
- Page 12 TOUCH SENSOR BUTTONS OF COMPUTER DO NOT WORK...
- Page 13 COMPUTER IS SWITCHING THROUGH THE SCREENS AUTOMATICALLY...
- Page 14 BOOTLOADER SCREEN DISPLAYED...
Need help?
Do you have a question about the CBC and is the answer not in the manual?
Questions and answers