Thank you for selecting our product. To ensure that your installation goes smoothly, please read
these instructions carefully before you begin. Also review the recommended materials and tools for a
smooth installation.
Before you start, verify that you have all the mentioned components for your vanity base model
shown below and ensure that all are free from defects. If any part is missing or damaged, contact
Customer Service for replacement parts.
INSTALLATION INSTRUCTIONS FOR:
PRODUCT:
30-1/4 in. KUBE BASE
DIMENSIONS: 30-1/4 in. W x 17-1/2 in. D x 29 in. H
(Dimensions are without vanity top)
MODEL:
KU.VB200
• Faucet and vanity top not included
Questions, problems, missing parts? Before returning to your retailer, call our Customer Service
department at 1-866-396-4033, 8:30 a.m. - 5 p.m., EST, Monday - Friday. ContactUs@magickwoods.com
PREPARATION
Tools Required for Assembly (not included):
• Tape Measure
• Electric Drill with #2 Drill Bit (A)
• Straight Edge or Leveling Meter
• (2) #8 x 2 in. Screws (B)
• (2) Wall Anchors - if the vanity will not
be screwed to wall studs (C)
• Pliers (D)
Estimated Installation Time: 2 hours (including removal of old vanity if applicable)
Base (1x)
Handle (4x)
1 in. screw
(8x)
KUBE VANITY BASES
PRODUCT:
38-1/4 in. KUBE BASE
DIMENSIONS: 38-1/4 in. W x 17-1/2 in. D x 29 in. H
(Dimensions are without vanity top)
MODEL:
KU.VB202
Base (1x)
Handle (4x)
1 in. screw
(8x)