CONTENTS IMPORTANT SAFETY INSTRUCTIONS DEVICE OVERVIEW OPERATING THE DEVICE USE OF ACCESSORIES CARE AND MAINTENANCE HOW TO USE TECHNICAL DATA ADVICE ON DISPOSAL SERVICE/GUARANTEE Basic safety precautions must be observed when using electrical devices. To avoid the danger of burns, electric shocks, fires and/or personal injury, please carefully read through this instruction manual before using the device for the first time and observe all instructions when using the device.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Power supply • Only connect the device to a plug that has been • Before opening the safety catch, the steam installed in accordance with regulations. Do not pressure within the device must be reduced and use any desk socket or extension cable.
Page 4
IMPORTANT SAFETY INSTRUCTIONS • Do not insert any objects into the openings! • Keep packaging material, such as plastic bags Be careful to ensure that the openings are not and expanded polystyrene pieces out of the blocked by any objects or dirt. If there are any reach of children.
Page 6
OPERATING THE DEVICE • Never fill the water heater with cleaning • In order to maintain the operating temperature agents, oils, solvents, chemicals or other liquids. and the required steam pressure, the device Moreover, never add any cleaning agent, continues heating regularly during operation. fragrance or any other kind of additive to the During this process, the red heat indicator lamp water.
USE OF ACCESSORIES USE OF ACCESSORIES CAUTION! To avoid inadvertently pressing the steam delivery button while changing accessories, the device must be always switched off and unplugged! Since the device parts remain very hot due to the hot steam, allow these to cool for about 5 minutes before changing the parts! Use of the handle without accessories The handle can be used without additional...
USE OF ACCESSORIES / CARE AND MAINTENANCE Fixing the floor cloth onto the frame • If it is very cold outside, avoid cleaning panes of Be careful to ensure, when changing the floor cloth, glass with steam due to the risk of breakage. that the floor wiper frame has cooled down, before the cloth is removed and a new one put in place.
Page 9
CARE AND MAINTENANCE / HOW TO USE Descaling the reservoir • Wash and dry new microfiber cloths before Assuming the device is not used exclusively with using for the first time. distilled water, it must be descaled at regular • Clean the microfiber cloth at a temperature of intervals.
Heating too strongly may cause softening of the material and affect the surface structure. TECHNICAL DATA MODEL ZQ 032 Voltage 220 - 240 V 50 Hz Rated output 1800 Watts Water capacity max.
We reserve the right to refuse to accept unrequested deliveries or to return relevant items back to the sender at charge ITEM NO. 10000244 Manufactured by: Ningbo Xinyang Electric Co., Ltd. for: AERA Rundfunk und Fernseh GmbH Hanns-Martin-Schleyer Strasse 2 D-77656 Offenburg 30777-English_2 .indd 25 27/2/07 9:28:48 AM...