ZA-441 USERS MANUAL Thank you for purchasing this Zartek worklight. This worklight has been engineered and manufactured to give you many years of dependable operation. Please take a few moments to read through the manual to get full usage from this innovative product.
Page 2
Only recharge using supplied adaptors with output of 8.4V. A red LED indicates charging, green LED indicates fully charged. The Zartek ZA-441 worklight has a built-in Li-ion battery pack. Although the unit arrives partially charged from the factory, it must be fully charged for 5 hours before first use.
Page 3
1% – 100%. Battery life will depend on the brightness of the beam. The Zartek ZA-441 worklight has an Aluminium lightweight housing for the light with powder coated steel H stand for firm positioning on flat surfaces. Beam direction can be adjusted by 360°...
Page 4
Should the batteries need replacing after many years of service, please contact the Zartek service department. Warranty: This product is warranted by Zartek against manufacturing defects in materials and workmanship under normal use for a 12 month period from date of purchase via our authorized appointed dealers.
Need help?
Do you have a question about the ZA-441 and is the answer not in the manual?
Questions and answers