What Is Included - Pyle Hydra PLMR440PA Owner's Manual

Introduction
An important member of the
PYLE
marine MOSFET amplifier series, we are
pleased to introduce the unique PLMR440PA, a powerful amplifier with public
address capabilities.
This
PYLE
marine models features both high pass and low pass crossovers.
For further flexibility in the use of a subwoofer, a variable bass boost control has
been included. You can control the subwoofer level with the remote level control
module.
PYLE
marine understands that amplifiers are placed in many different kinds of
installations, so we have also included an input sensitivity control to help you
integrate the amp into your system regardless of the nature of your input source.
A custom microphone is included. Pressing the button on the microphone will
mute the audio and allow you to be heard easily by others on your boat.
PYLE
marine amplifiers are constructed using a special corrosion resistant
coating on the printed circuit board to prevent damage from the high humidity
of the marine environment.
In order to prevent the intrusion of water into the amplifier enclosure, we
have provided the connections at the end of waterproof wires/cables, and
tightly grommeted the wires as they pass through the end panels.
An additional important, unique component is the rubber pad which seals all
control openings.
What is included?
When first unpacking your new amplified subwoofer, please check first that
the package contains all of the items below. If something is missing, contact
the store where you purchased the product.
• Marine amplifier
• Custom microphone and mounting bracket
• High input cable with connector(s)
• Speaker output cable with connector(s)
• Remote level controller
• Four(4) mounting screws
2-PLMR44OPA Owner's Manual