Advertisement
LED level display
these rows of LEDs display the Amplifier Output Levels. Left and right channels are
displayed independently at peak levels.
power indicator LED
this LED is illuminated when the unit is properly powered, grounded and the remote
power has been turned on.
fader control
• in a 4 Speaker system, rotating the knob to the FRONT side increases the level
of the front speakers; rotating to the REAR side increase level of the rear speakers.
At mid position, both sets of speakers are at maximum level.
• in a 2 Speaker system, the fader control should be rotated to the position which
provides highest levels for both sets of speakers.
volume control
allows adjustment of sound level for particular program material or source.
equalizer controls
this seven-band equalizer gives you control over the output levels at various
frequencies.
subwoofer frequency control
lets you adjust the subwoofer frequency and crossover point from 40-400 Hz.
subwoofer boost control
lets you adjust the subwoofer boost level from a 0 to +18 dB increase.
power connections
connect to power source as follows:
+12V: Connect a red wire of at least 12 gauge to the car battery or other power
source.
GROUND: Connect a black wire of at least 12 gauge to car chassis for
ground connection
REMOTE: Connect an orange wire to remote activating (12V DC) wire of car stereo
or other head unit.
subwoofer channel outputs
RCA cables are used to connect the sub outputs to the subwoofer amplifier inputs.
line channel inputs
RCA cables are used to connect the front input signal from head unit or other source.
speaker connections
the connections are used to power a front and rear speaker systems
center frequencies
subwoofer crossover
bass boost
amplifier power
frequency response
input level
(for 10% THD output)
total harmonic distortion (THD)
(at 15W output)
speaker impedance
signal-to-noise ratio (S/N)
separation
current drain
power supply voltage
dimensions (W x H x L)
mm
inches
7-Band Equalizer/Amplifier
Subwoofer Crossover
Bass Boost
with
and
65 Hz · 150 Hz
400 Hz · 1.4 KHz
2.4 KHz · 6 KHz
15 KHz
40 - 400 Hz
0 - +18 dB
30 Watts (RMS) x 4
20 - 20 KHz (+/– 1 dB)
200 mV
< 0.5%
4-8 Ohms
90 dB
60 dB
6A maximum
10-16V DC Neg. Ground
160 x 29 x 140
6.3 x 1.1 x 5.5
Advertisement
