Turn On The Hands-Free Car Kit; Pair The Hands-Free Car Kit With Your Bluetooth Mobile Phone - Pyle BlueTech PBT70R User Manual

II-3

Turn on the Hands-free Car Kit

When the car kit is plugged to the cigarette lighter socket in your car and your car is on, the car
kit will turn on automatically and try to auto reconnect the last connected mobile phone. A long
tone indicates that the hands-free Car Kit has turned on. At the same time, blue LED will flash
for a second. Blue LED will keep on flashing every 3 seconds.
Note: The Car Kit can also be turned on manually by pressing and holding the "On/Off " key for 2
seconds when it is off.
Bluetooth
II-4 Pair the Hands-free Car Kit with Your
1 Put the hands-free Car Kit in pairing mode
After the Car Kit has turned on automatically, it will try to auto reconnect the last connected
mobile phone. If it fails connecting for the first time, it will enter pairing mode immediately. A
double tone will be heard. The red and blue LEDs will flash alternatively, which indicates the
hands-free Car Kit has entered into the pairing mode.
Note: The Car Kit can also be put in pairing mode manually by pressing and holding the
"On/Off " key for 5 seconds when it is off.
Bluetooth
2 Put your mobile phone in pairing mode
2.1 Follow the operation manual of your
Typically, this has to be done by going to a setup or connect menu and then selecting the
Bluetooth
options to discover devices.
connection.
2..2 Your phone's display will indicate that it has found the new device "PBT70R ". When you
want to pair it, the phone's display would demand a passkey or PIN. You can enter a
sequence of "0000".
Mobile Phone
Bluetooth
mobile phone to start the pairing process.
Bluetooth
may take several seconds to establish a
8