Pyle PTC40LC Operating Manual page 13

Menu Operation
Press ▲ / ▼ key to move the cursor to the item to be selected (item selected is highlighted in yellow). Press
your selection and scan. After the scan is finished, the following menu will display. The channels found are automatically
saved as below:
When the channels are found, use
Press Enter button to display a channel list that you can select channel as below:
Allows you to name the channel that is selected. Use ◄ / ► to move the cursor and use ▲/▼ to input the name and then
press Menu or Enter to return or exit as following:
To select language of the OSD such as English/ French and Spain
Autoprogram Menu
NTSC Channel 19
Analog Channels Found
Digital Channels Found
Progress(%) 12
/ to add it to the channel list.
Manual Channel Set Menu
Ch 42 -1 ATSCdmo
Ch 2 -0
Ch 11 -0
Ch 22 -0
Ch 31 -0
Ch 52 -0
Ch 54 -0
Ch 66 -0
Ch 68 -0
To Move To Select
Enter
Channel Labels Menu
Ch 42-1
To Move Enter
12
Not Found
2
0
Viewable
Viewable
Viewable
Viewable
Viewable
Viewable
Viewable
Viewable
Viewable
To Exit
M enu
ATSC dmo
To Change Me nu To Exit
Enter key to enter