User’s Guide Book 1-2 How to install 2-1 Display Mode 1. AUDIO IN: Connect audio cable both your computer and monitor. 2. D-SUB: Connect VGA signal cable both your computer and monitor. Fasten bolts after connection. 3. DVI: Connect DVI cable both your computer and monitor. Fasten bolts after connection.
User’s Guide Book 3-1 Display (Function) Color Color - Contrast : Contrast, Brightness, Color Adjust, Color Temp, Auto Color, Adjust the lightness and dimness from 0 to 100. Back Brightness : Adjust the brightness and darkness from 0 to 100. Image Setting - Clock, Phase, Gamma, Sharpness, Auto Adjust, Color Adjust : Adjust the density of the color.(Red, Blue, Green)
User’s Guide Book Image Setting Position Clock : H.Position : Adjust frequency from 0 to 100. Move the screen horizontally from 0 to 100. Phase : V.Position : Adjust phase from 0 to 50. Move the screen vertically from 0 to 100. Gamma : Back : Adjust gamma from 0 to 3.
Page 7
User’s Guide Book OSD Manu Language OSD H.Pos : Move OSD menu window horizontally on screen right Select Korean and left (Range from 0 to 100). English : Select English OSD V.Pos : Move OSD menu window vertically on screen up and down (Range from 0 to 100).
User’s Guide Book Misc. 3-2 Control Button Signal Source : 1. Press menu button to operate OSD window. Select the signal RGB or DVI. Fit to screen : 2. Place the cursor where you want using up/down button. Control the screen ratio 16:10 or 4:3. 3.
Page 9
User’s Guide Book Do not install this monitor on the outside For cleaning, do not use liquid cleaners. and near water. If may cause damage to Never touch the power plug with wet-hands This safety instruction has Warning and Caution as below. the product, electric shock and fire.
Page 10
User’s Guide Book Install this monitor some distance Place this product on a stable place. Install this monitor about 50cm far from Do not press the LCD panel with hands or from the wall and do not install unless If not, it may fall, causing serious the eyes and an angle of 0~15 degrees the sharpened material hardly.
Page 11
User’s Guide Book INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Power indicator is off - The power cord is - Connect the power...
Need help?
Do you have a question about the OR2407WBP and is the answer not in the manual?
Questions and answers