3-3. MD BLOCK ASSY
• When installing the MD block assy, position the knobs with the switches.
• When installing the microphone cabinet assy, align the knobs with the spring and switches.
4 screws (1.7x3), tapping
5 bracket (speaker)
6 speaker (2.8cm)
3-4. MAIN BOARD, COMPLETE
• When installing, position the cam gear with the switch.
b
switches
knob (TAPE SPEED)
knob (FAST PB)
8 MAIN board, complete
3 unsolders
4 CN101
a
1 screw (B1.7x4), tapping
switches
spring
switch
2 MD block assy
knobs
(REC PAUSE/REC)
knob
(HOLD EJECT)
knob
(FF/CUE•REW/REVIEW)
7 screw (B1.7x4), tapping
6 screw, precision +P 1.4x1.6
2 unsolders
– 6 –
3 cabinet assy, microphone
5 screw, precision +P 1.4x1.6
1 unsolders
gear, cam
switch