Advertisement
5. Cleaning
Cleaning the globe :
4
5
6. Troubleshooting
Changing the bulb :
6
7
5
Problem
If the floating light
does not light up
CAUTION !
If other faults occur, please contact GARDENA Service.
DANGER ! Electric shock !
V Before cleaning the lamp, unplug the transformer from
the mains.
Do not use any corrosive or abrasive cleaning media.
1. Unscrew the globe
4
2. Clean the globe
3. Clean the sealing ring in the screw socket
4
4. Screw the globe
DANGER ! Electric shock !
V Before rectifying any faults, disconnect the transformer
at the mains.
Only 12 V halogen lamps with 5 W power (socket G4) may be used.
Replacement lamps are available on request from GARDENA
Service.
4
1. Unscrew globe
(see 5. Cleaning).
2. Remove protective cap
7
3. Remove lamp
and place the new lamp
5
socket
.
Caution : Do not touch the glass body of the bulb with
your fingers.
4. Replace protective cap
4
5. Screw the globe
Probable Cause
The cable or the lamp
is faulty.
Work on the electrical parts must only be carried out by
GARDENA Service Centres.
4
from the screw socket
with a damp cloth.
in again.
6
.
6
.
in again (see 5. Cleaning).
Remedy
v Disconnect the power
supply and check all
outgoing connections,
cables and lamps.
5
.
5
and allow to dry.
7
in the screw
9
Advertisement
