Page 2
Introduction Thank you for purchasing a TR3-C202-A0-1 RFID READER/WRITER. Be sure to read this manual before using the product. After reading it, store the manual in a convenient place for future reference. Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
Page 3
This product can communicate the standard tags of ISO/IEC15693 and ISO/IEC18000-3(Mode1). Supports Manufacturer Tag-it HF-I Texas Instruments my-d Infineon Technologies NXP Semiconductors I・CODE SLI MB89R118 FUJITSU Japan RoHS is support Restriction of Hazardous Substances Waste Dispose of the Products as industrial waste. Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
Page 4
1. Turn off the power before installation or removing. 2. The following effects may not work correctly. ・ Near 13.56MHz radio device ・ Near speakers , Inverter, motor and Plasma Display 3. The communication range may vary due to environment and conditions. Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
UID of the tag automatically sends Host Device. RDLoop mode UID or User Data of the tag automatically sends Host Device. For more information please refer to the TR3-PROTOCOL manual. ■ Environmentally EU RoHS(2002/95/EC) Support Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
This connector is for connection to the host. ② FCC ID stickers Production numbers, will be 8-digit serial number. Model Name Serial number:********(F) ③ LED1 Displays the status of this product. ④ Connect the antenna cable. ⑤ Screw holes M3 holes Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
2.2.1 TR3-A202 ① ② ③ ④ Name Description ① Connect the antenna cable. ② Nameplate Production numbers, will be 8-digit serial number. Model Name Serial number:********(F) ③ Inspection mark ④ Screw holes M3 holes Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
Serial number:********(F) ④ Connect the antenna cable. 2.2.3 TR3-A401 ① ② ③ Name Description ① Connect the antenna cable. ② Nameplate Production numbers, will be 8-digit serial number. Model Name Serial number:********(F) ③ Inspection mark Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
3.1 Installation into a host device 3.1.1 Installation from the Front Four, M3 holes M3 Screw Host Device 3.1.2 Installation from the Back Four, M3 holes Screw hole depth : 3mm Host Device M3 Screw Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
3.2 Antenna installation into a host device 3.2 Antenna installation into a host device 3.2.1 Screw holes M3 Screw 3.2.2 Guide TR3-A401 is recommended that you set up a guide on fixed-like the figure below. Host Device TR3-A401 Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
3.3.1 Attaching the Cable and Antenna Host Device TR3-C202-A0-1 Antenna Antenna Cable 3.3.2 Direct connection to the Host Device Interface Please prepare to the interface harness. Host Device TR3-C202-A0-1 Host Device Interface Interface harness Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
※1:Tag-it HF-I is a registered trademark of Texas Instruments Incorporated. my-d is a registered trademark of Infineon Technologies AG. I・CODE SLI is a registered trademark of NXP Semiconductors. MB89R118 is a registered trademark of FUJITSU Japan. ※2:initialization Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
Page 15
H : Detection Input/Output or Trigger input L : Trigger ON Input/Output Connector : JST S2B-PH-SM4-TB(LF)(SN) Housing : JST PHR-2 Contact : JST SPH-002T-P0.5S Pin assignment Pin No. Symbol Function Analog signal ※2:initialization Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
Page 16
:max 1.0W Consumption Ambient Temperature 0 to 55 degree Conditions Operating range Humidity Operating 30 to 80%RH range Temperature 0 to 55 degree Storage range Humidity 30 to 80%RH Storage range Other Accessories None Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
Page 18
・TX, RX, IO1, IO2 and IO3 is, Pull-up resistor has been connected. ・TX, RX, IO1, IO2 and IO3 is, 100 ohm resistor has been connected. Output port, LED is not driven. If the LED drive, please use the digital transistors. Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
30 to 80%RH range Temperature 0 to 55 degree Storage range Humidity 30 to 80%RH Storage range Other Accessories RFID Sticker 1 sheet Model Name : SEL41400L ■ Dimensions Unit:mm Tolerance:±1mm Substrate thickness : 1.6mm Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
30 to 80%RH range Temperature 0 to 55 degree Storage range Humidity 30 to 80%RH Storage range Other Accessories RFID Sticker 1 sheet Model Name : SEL41400L ■ Dimensions Unit:mm Tolerance:±1mm Substrate thickness : 1.6mm Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
30 to 80%RH range Temperature 0 to 55 degree Storage range Humidity 30 to 80%RH Storage range Other Accessories RFID Sticker 1 sheet Model Name : SEL41400L ■ Dimensions Unit:mm Tolerance:±1mm Substrate thickness : 1.0mm Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...
Check the voltage Power Input Voltage : DC5V±10% Voltage Check the Voltage fluctuation fluctuation Check the Screw Product Checking and verifying Attachment Check the Connector Cable Check the Cable break None Performance Check the Performance Work Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series...