Subscribe to Our Youtube Channel
Summary of Contents for eMotimo Integration Kit for Dana Dolly
- Page 1 Integration Kit for Dana Dolly Instruction Manual V 1.1 eMotimo Dana Dolly integration instructions...
-
Page 2: Table Of Contents
#5 Mounting for universal track ends, round track, top up #6 Mounting for universal track ends, round track, bottom up #7 Mounting for universal track ends, triangle track, top up #8 Mounting for universal track ends, triangle track, bottom up eMotimo Dana Dolly integration instructions... -
Page 3: Your Dana Dolly Kit & Identifying Orientation
What Dana Dolly kit do you have? Universal track ends Original track ends: Top up Top up Bottom up Bottom up Round track: Triangle track: eMotimo Dana Dolly integration instructions... -
Page 4: What's Included
What Is Included in the eMotimo Integration Kit: Part Names 1. Motor Mount 2. Belt Clamp (two included) 1.1 - Carriage Mount & Motor 2.1 - Belt clamp base 1.2 - Motor cable / plug 2.2 - Belt clamp tensioner 1.3 - Idler/belt adjustment thumbscrew... -
Page 5: General Principles / Mounting
Tighten down at the bottom of the clamp the with 1/4-20 clamp thumbscrew to lock the clamp in place. eMotimo Dana Dolly integration instructions... - Page 6 Pro tip: Leave this motor attached. If you don’t route the belt, manual slides are still possible. Motor engaged with belt. Motor disengaged. Belt removed. Motor still mounted. eMotimo Dana Dolly integration instructions...
- Page 7 Mounts to arca clamp eMotimo clamp riser Arca clamp mounts to spectrum base. Bottom mounts to 3/8-16” stud (half ball leveler) Half ball leveler (3/8-16” stud) Mounts to ball adapter Ball adapter Mounts to Dana Dolly Dana Dolly eMotimo Dana Dolly integration instructions...
-
Page 8: Mounting For Original Track Ends, Round Track, Bottom Up
A) Wrap belt under and around #4 and #3 pegs. Pull up and around #1 peg . B) Tighten belt by pushing forward Tooth Clamp. C) Lock in place by tightening down 1/4-20” thumb screw. eMotimo Dana Dolly integration instructions... -
Page 9: Mounting For Original Track Ends, Round Track, Top Up
A) Wrap belt under and around #4 and #3 pegs. Pull up and around #1 peg . B) Tighten belt by pushing forward Tooth Clamp. C) Lock in place by tightening down 1/4-20” thumb screw. eMotimo Dana Dolly integration instructions... -
Page 10: Mounting For Original Track Ends, Triangle Track, Bottom Up
A) Wrap belt under and around #4 and #3 pegs. Pull up and around #1 peg . B) Tighten belt by pushing forward Tooth Clamp. C) Lock in place by tightening down 1/4-20” thumb screw. eMotimo Dana Dolly integration instructions... -
Page 11: Mounting For Original Track Ends, Triangle Track, Top Up
5) Routing belt: A) Wrap belt around #4 and #3 pegs. Pull up and around #1 peg . B) Tighten belt by pushing forward Tooth Clamp. C) Lock in place by tightening down 1/4-20” thumb screw. eMotimo Dana Dolly integration instructions... - Page 12 5) Routing belt: A) Wrap belt above and around #2 peg. Pull down and back around #1 peg. B) Tighten belt by pulling back Tooth Clamp. C) Lock in place by tightening down 1/4-20” thumb screw. eMotimo Dana Dolly integration instructions...
-
Page 13: Mounting For Universal Track Ends, Round Track, Bottom Up
5. Routing belt: A) Wrap belt under and around #1 peg. Pull up and around #1 peg. B) Tighten belt by pushing forward Tooth Clamp. C) Lock in place by tightening down 1/4-20” thumb screw. eMotimo Dana Dolly integration instructions... -
Page 14: Mounting For Universal Track Ends, Triangle Track, Top Up
4. Routing belt: A) Wrap belt above and around #2 peg. Pull down and around #1 peg. B) Tighten belt by pulling back Tooth Clamp. C) Lock in place by tightening down 1/4-20” thumb screw. eMotimo Dana Dolly integration instructions... -
Page 15: Mounting For Universal Track Ends, Triangle Track, Bottom Up
5. Routing belt: A) Wrap belt under #1 peg. Pull up and back around #1 peg. B) Tighten belt by pushing forward Tooth Clamp. C) Lock in place by tightening down 1/4-20” thumb screw. eMotimo Dana Dolly integration instructions... - Page 16 Learn more at emotimo.com/pages/dana-dolly Find us on social media @eMotimo #eMotimo #spectrumST4 #DanaDolly #eMotimoDanaDolly Get support at support.eMotimo.com eMotimo Dana Dolly integration instructions...
Need help?
Do you have a question about the Integration Kit for Dana Dolly and is the answer not in the manual?
Questions and answers