Factory Data Reset - Panasonic FZ-A1ADAAZAM Operating Instructions Manual

Troubleshooting (Basic)
The external display does not
display.
The external display does not work
normally.
There are red, green, or blue dots on
the screen, or there is unevenness in
colors and brightness on the screen.
Screen Operation
Cannot point the correct position.
Others
No response

Factory Data Reset

CAUTION
z Factory data reset function will return the tablet computer to the default condition. When you reset the
tablet computer, the stored data will be erased.
Back up important data to other media before reset.
1.
Touch [<<<Apps icon>>> Apps] - [<<<Settings icon>>> Settings] - [<<<Privacy icon>>> Privacy] -
[Factory data reset].
2.
Follow the on-screen instructions.
24
z Check the cable connection.
z Turn on the display.
z If the external display does not support the power saving
function, it may not work normally when the tablet computer
enters the power saving mode. Turn off the external display.
The following are not malfunctions.
z Although advanced high-precision technologies are used in
the production of color LCD screens, 0.002% or less of the
picture elements may be dark or remain constantly lit (i.e.,
more than 99.998% of elements function properly).
z Due to the natural characteristics of LCD screens, you may
notice unevenness in colors and brightness depending on
your angle of view.Hues may also vary by product.
z Perform the screen calibration (è page @@).
z Press and hold until "Power off" screen is displayed and
touch "OK", then press and hold
to turn it on.
z If the application does not work normally, uninstall and
reinstall the application. To uninstall :
1.
Touch [<<<Apps icon>>> Apps] - [<<<Settings icon>>>
Settings] - [<<<Applications icon>>> Applications] -
[Manage applications].
2.
Touch the application to uninstall, and touch [Uninstall].
3.
Uninstall the application by following the on-screen
instructions.
for more than 2 seconds