Download Print this page

Allen-Bradley TLS1-GD2 Installation Instructions page 4

Guardmaster escape release

Advertisement

Safety Contacts
Designation / Utilization Cat.
Thermal Current
Current, Min.
Auxiliary Contacts
Actuator Holding Force, Max.
Actuation Speed, Max.
Actuation Speed, Min.
Ingress Protection Rating
Operating Temperature
Mechanical Life
Electrical Life
Rear Release Unit
Mechanical Life
Max. Operational Speed
Max. Operational Force
Torque Settings, Max.
Lock Type
Power supply
Note: The safety contacts of these products are described as normally closed (N.C.), ie. with
the guard closed, actuator in place (where relevant) and the machine able to be started.
Contacts de sécurité
Désignation/utilisation
Intensité thermique
Intensité minimale
Contacts auxiliaires
Force de maintien maxi. de l'actionneur
Vitesse maxi. d'activation
Vitesse mini. d'activation
Protection
Plage de températures de service
Durée de vie mécanique
Durée de vie électrique
Dispositif de déverrouillage arrière
Durée de vie mécanique
Vitesse maximale de fonctionnement
Force maximale de fonctionnement
Couples de serrage
Verrouillage
Alimentation
Remarque : Les contacts de sécurité de ces produits sont décrits comme normalement fermés (NF), c'est-à-dire
lorsque la protection est fermée, l'actionneur en place (si applicable) et la machine en état de démarrer.
Contatti di sicurezza
Designazione / Cat. di utilizzazione
Corrente termica
Corrente, min.
Contatti ausiliari
Forza di tenuta dell'attuatore, massima
Velocità attuatore, massima
Velocità attuatore, minima
Classificazione IP
Temperatura d'esercizio
Durata meccanica
Durata elettrica
Unità posteriore di sgancio
Durata meccanica
Velocità massima d'esercizio
Forza massima d'esercizio
Regolazioni coppia, massima
Tipo di blocco
Alimentazione elettrica
NB: i contatti di sicurezza di questi prodotti sono descritti come normalmente chiusi (NC), vale a dire con la
protezione chiusa, l'attuatore in funzione (ove sia richiesto) e la macchina in condizione di avviamento.
2 N.C. + 1 N.C. direct opening action (TLS-1)
2 N.C. + 2 N.C. direct opening action (TLS-3)
A300 / AC-15
240V / 3 A, 120V / 6 A
10 A
5V 5 mA dc
1 N.O. + 1 N.O. (TLS-1)
1 N.O. (TLS-3)
2000 N (450 lb)
160 mm (6.29 in) per second
100 mm (3.94 in) per minute
IP67
(–20 °C...+60 °C), (–4 °F...+140 °F)
1,000,000 operations
1,000,000 operations
10,000 operations
160 mm (6.29 in) per second
50 N (11.25 ib)
1.4 N•m (12.39 lb•in) fixing bolts
1.2 N•m (10.62 lb•in) lid screws
1.0 N•m (8.85 lb•in) terminal screws
0.8 N•m (7.08 lb•in) terminal block screws
Power to Release (TLS-1, TLS-3)
24V ac/dc or 110V ac or 230V ac
2 N.C. + 1 N.C. ouverture directe (TLS-1)
2 N.C. + 2 N.C. ouverture directe (TLS-3)
A300 / AC-15
240V / 3 A, 120V / 6 A
10 A
5V 5 mA cc
1 N.O. + 1 N.O. (TLS-1)
1 N.O. (TLS-3)
2000 N
160 mm/s
100 mm/mn
IP67
–20 °C...+60 °C
1,000,000 operations
1,000,000 operations
10,000 operations
160 mm/s
50 N
Vis de fixation 1.4 N•m
Vis du couvercle 1.2 N•m
Vis des bornes 1.0 N•m
Boulons à tête 0.8 N•m
Ouverture à l'alimentation (TLS-1, TLS-3)
24 V ca/cc ou 110 V ca ou 230 V cc
2 N.C. + 1 N.C. ad azione diretta di apertura (TLS-1)
2 N.C. + 2 N.C. ad azione diretta di apertura (TLS-3)
A300 / AC-15
240V / 3 A, 120V / 6 A
10 A
5V 5 mA c.c.
1 N.O. + 1 N.O. (TLS-1)
1 N.O. (TLS-3)
2000 N
160 mm per secondo
100 mm per minuto
IP67
–20 °C...+60 °C
1.000.000 di funzionamenti
1.000.000 di funzionamenti
10.000 funzionamenti
160 mm al secondo
50 N
1.4 N•m per i bulloni di fissaggio
1.2 N•m per le viti del coperchio
1.0 N•m per le viti dei morsetti
0.8 N•m per i bulloni della testa
Potenza di rilascio (TLS-1, TLS-3)
24V c.a./c.c. o 110V c.a. o 230V c.a.
Sicherheitskontakte
Bezeichnung / Einsatzkat.
Wärmestrom
Strom, Min.
Hilfskontakte
Betätigungselement-Haltekraft Max.
Betätigungsgeschwindigkeit Max.
Betätigungsgeschwindigkeit Min.
Eindringen-Schutzgrad
Betriebstemperatur
Mechanische Lebensdauer
Elektrische Lebensdauer
Auslöseeinheit hinten
Mechanische Lebensdaue
Max. Betriebsdrehzahl
Max. Betriebskraft
Drehmomenteinstellungen, Max
Verriegelungstyp
Stromversorgung
Hinweis: Die Sicherheitskontakte dieser Produkte sind als normalerweise geschlossen (N.C.) beschrieben, d.h. bei
geschlossener Schutzvorrichtung, Betätigungselement in Position (falls zutreffend) und Maschine startfähig.
Contactos de seguridad
Cat. designación / utilización
Corriente térmica
Corriente, mín
Contactos auxiliaresv
Fuerza de sujeción del accionador, máx.
Velocidad del accionador, máx.
Velocidad del accionador, min.
Protección contra el ingreso
Temperatura operativa
Vida mecánica
Vida eléctrica
Unidad de desconexión posterior
Vida mecánica
Velocidad operativa máx
Fuerza operativa máx
Ajustes de par, máx.
Tipo de cierre
Alimentación
Nota: Los contactos de seguridad de estos productos se describen como normalmente cerrados (o N.C.), es decir,
con el protector cerrado, el accionador en su lugar (si procede) y la máquina en condiciones de arrancar.
Copyright © 2012 Rockwell Automation, Inc. All Rights Reserved.
2 N.C. + 1 N.C. direkte Öffnung (TLS-1)
2 N.C. + 2 N.C. direkte Öffnung (TLS-3)
A300 / AC-15
240V / 3 A, 120V / 6 A
10 A
5V 5 mA dc
1 N.O. + 1 N.O. (TLS-1)
1 N.O. (TLS-3)
2000 N (450 lb)
160 mm (6.29 Zoll) pro Sekunde
100 mm (3.94 Zoll) pro Minute
IP67
(–20 °C...+60 °C), (–4 °F...+140 °F)
1.000.000 Betätigungen
1.000.000 Betätigungen
10,000 Betätigungen
160 mm/sec
50 N
1.4 N•m (12.39 lb•in) Befestigungsschrauben
1.2 N•m (10.62 lb•in) Deckelschrauben
1.0 N•m (8.85 lb•in) Klemmenschrauben
0.8 N•m (7.08 lb•in) Kopfbolzen
Strom für Freigabe (TLS-1, TLS-3)
24V AC/DC oder 110V AC oder 230V AC
2 N.C. + 1 N.C. acción de apertura directa (TLS-1)
2 N.C. + 2 N.C. acción de apertura directa (TLS-3)
A300 / AC-15
240V / 3 A, 120V / 6 A
10 A
5V 5 mA c.c.
1 N.O. + 1 N.O. (TLS-1)
1 N.O. (TLS-3)
2000 N (450 lb)
160 mm (6.29 in) por segundo
100 mm (3.94 in) por minuto
IP67
(–20 °C...+60 °C), (–4 °F...+140 °F)
1,000,000 operaciones
1,000,000 operaciones
10.000 operaciones
160 mm (6,2 pul.) por segundo
50 N (11.25 ib)
1.4 N•m (12.39 lb•in) tornillos de sujeción
1.2 N•m (10.62 lb•in) tornillos de la tapa
1.0 N•m (8.85 lb•in) tornillos terminales
0.8 N•m (7.08 lb•in) pernos de cabezales
De liberación eléctrica (TLS-1, TLS-3)
24V ca/cc o 110V ca o 230V ca

Advertisement

loading

This manual is also suitable for:

Tls3-gd2