Technical Data; Optional Accessories; What To Do If - Siemens WT44E100IN Manual

Technical data

Dimensions (DxWxH)
Weight
Max. capacity
Condensate container
Connection voltage
Connected load
Fuse protection
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
Consumption values table
Spin speed which
Programme is used for spinning the
laundry
Cottons
Cupboard Dry* 1400 rpm
1000 rpm
800 rpm
Iron Dry* 1400 rpm
1000 rpm
800 rpm
Easy-Care
Cupboard Dry* 800 rpm
600 rpm
* Programme setting for testing in accordance with the applicable IEC61121 standard.
** The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the laundry,
the degree of dryness that has been set, the amount of laundry being loaded, the environmental conditions, and any additional functions that
have been activated.

Optional accessories

Platform
WZ
For easier loading and unloading. The basket contained in the drawer can be used to carry the laundry.
20500
Washer-dryer stack connection set
WZ
The dryer can be placed on top of a suitable washing machine with the same width and depth to save space. The dryer
20310
must be fastened to the washing machine using this connection set. With pull-out worktop: WZ 20300
Connection fittings for condensation outlet
WZ
The condensation is conveyed directly via a hose.
20160
Installation underneath the worktop
WZ
Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.
20290
60 x 60 x 85 cm (height adjustable)
approximately 45 kg
7 kg
4.2 l
see appliance rating plate
Duration** Energy consumption**
7 kg
112 min
131 min
150 min
93 min
111 min
130 min
3.5 kg
48 min
60 min
(from after-sales service using order number)

What to do if ...

If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service. We
will always find an appropriate solution and will avoid unnecessary visits by engineers. Trust the
expertise of the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can be found
in the enclosed after-sales service directory.
When contacting the after-sales service, please quote the appliance's product number (E no.) and
production number (FD) (see the inside of the door). Set the programme selector to Off and remove
the appliance plug from the socket.
The Start/Pause indicator lamp
does not light up.
The display panel light and
indicator lights (depending on
model) go out and the Start/
Pause indicator light flashes.
The Empty water and Start/Pause
indicator lamp flash.
The Clean filter and Start/Pause
indicator lamp flash.
Dryer does not start.
7 kg
3.67 kWh
Water is running out.
4.28 kWh
The door opens by itself.
4.90 kWh
2.65 kWh
Creasing.
3.34 kWh
4.05 kWh
3.5 kg Laundry is not dried correctly or is
still too damp.
1.39 kWh
1.70 kWh
Drying time too long.
The humidity in the room
increases significantly.
Power failure.
One or more indicator lights for
programme status are flashing.
The Start/Pause indicator lamp
does not light up.
9
Mains plug plugged in?
Programme selected? Check the socket fuse.
Energy-saving mode is activated see the separate Energy-saving
mode instructions.
Empty the condensate container.
If featured, check hose for condensation outlet.
Clean the fluff filter and/or air cooler under running water
Page 4/6.
Start/Pause button selected? Door closed? Ambient temperature
greater than 5°C? The optimum ambient temperature for drying is
between 5 °C and 35 °C.
Align dryer horizontally.Clean air cooler seal.
Push the door closed until you hear it engage.
Laundry load exceeded? Remove articles of clothing immediately
after the end of the programme, hang up and pull into shape.
Unsuitable programme selected Page 7.
After the end of the programme, warm laundry feels damper than it
actually is. Spread the laundry out and allow the heat to disperse.
Finely adjust the dryness level – this extends the drying time but
does not increase the temperature. Your laundry will become drier.
Select a programme with a longer drying time or increase the
drying level. This does not increase the temperature.
Select a time programme for extended drying of laundry that is still
damp.
If you have exceeded the maximum load for the programme, the
laundry may not be dried correctly.
Clean the moisture sensor in the drum. A fine layer of limescale
may adversely affect the performance of the sensors and your
washing will not dry properly.
Drying has been interrupted as a result of a power cut, because the
condensate container is full or because the maximum drying time
has been exceeded.
Rinse the fluff filters under running water
Insufficient supply of air ensure that air can circulate.
Air inlet possibly blocked Clear inlet Page 8.
Ambient temperature higher than 35 °C ventilate the room. The
optimum ambient temperature for drying is between 5 °C and 35
°C. Outside of this range, the drying time may increase.
Make sure the room is sufficiently ventilated.
Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate. Be careful as the door, the drum
and the laundry may be hot.
Clean filter and air cooler Page 4/6.
Check installation conditions Page 8.
Switch off, leave to cool down, switch on again, restart programme.
Mains plug plugged in?Programme selected?
Check the socket fuse.
Page 4.
10