Table of Contents
Advertisement
Quick Links
190 mm
Please dispose of packaging for the product in a responsible
manner. It is suitable
for recycling.
Help to protect the
Air Hammer Kit
environment, take the packaging to the local amenity tip and
place into the appropriate recycling bin.
FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR
SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
06724
www.sip-group.com
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference
Ref: 180913
16
1
Advertisement
Table of Contents
Related Manuals for SIP 06724
Summary of Contents for SIP 06724
- Page 1 FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY ON: TEL: 01509500400 EMAIL: sales@sip-group.com or technical@sip-group.com 06724 www.sip-group.com Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference...
- Page 2 LE12 9NH England As the manufacturer's authorised representative within the EC declare that the 190 mm air hammer Kit - SIP Part. No. 06724 Conforms to the requirements of the following directive(s), as indicated. 2006/42/EC Machinery Directive And the relevant harmonised standard(s) Signed: …………………………………...
- Page 3 PARTS LIST CONTENTS Ref. No. Description SIP Part No. Ref. No. Description SIP Part No. Hammer Body AI05-00530 Throttle Spring AI05-00128 Trigger Pin (3×16) AI05-00121 Air Inlet AI05-00129 Regulator Valve Pin (3×17.5) AI05-00122 Upper valve case AI05-00130 O-ring 8×1.8 AI05-00123...
- Page 4 SAFETY INSTRUCTIONS EXPLODED DRAWING IMPORTANT: Please read the following instructions carefully, failure to do so could lead to serious personal injury and / or damage to the air hammer. When using your air hammer, basic safety precautions should always be followed to reduce the risk of personal injury and / or damage to the air hammer.
- Page 5 TROUBLESHOOTING SAFETY INSTRUCTIONS….cont ulators, hoses, isolation valves and connection devices MUST be suitable for the in- tended application correctly installed and maintained in good condition by a com- petent person. If any of the following symptoms occurs during your operation, stop using the tool immediately, or serious personal injury could result.
- Page 6 SAFETY INSTRUCTIONS….cont OPERATING INSTRUCTIONS….cont We recommend wearing a face mask or respiratory equipment when Note: To remove the retaining spring; press against the lower spring tab to using any air tool; particularly during drilling, sanding, grinding, sawing or remove the spring and the upper spring tab to refit the spring. other operations likely to cause airborne particles.
- Page 7 OPERATING INSTRUCTIONS….cont GETTING TO KNOW YOUR AIR HAMMER LUBRICATION An automatic in-line filter-regulator-lubricator is recommended (Fig.1) as it in- creases tool life and keeps the tool in sustained operation. The in-line lubricator should be regularly checked and filled with air tool oil. Proper adjustment of the in-line lubricator is performed by placing a sheet of paper next to the exhaust ports and holding the throttle open approximately 30 seconds.
- Page 8 Guarantee: This SIP air hammer is covered by a 12 month parts and labour warranty covering fail- ure due to manufacturers defects. This does not cover failure due to misuse or operat-...
Need help?
Do you have a question about the 06724 and is the answer not in the manual?
Questions and answers