Operating Instructions
Auto-Ranging Voltage Indicator
Catalog No.
C403-3374
Voltage
600V - 69kV
The equipment covered in this manual must be used and serviced only by competent,
trained personnel familiar with and following approved work and safety practices.
This equipment is for use by such personnel and this manual is not intended as a
substitute for adequate training and experience in safe procedures for this type of
equipment.
These instructions neither cover all details or situations in equipment use, nor do
they provide for every possible contingency to be encountered in relation to
installation, operation or maintenance. Should additional information and details be
desired or if situations arise which are not covered adequately for the user's purpose,
the specifics should be referred to Hubbell Power Systems, Chance
Before operating a CHANCE
understand, and follow these instructions. Keep these instructions in the device
case for future reference.
Do not allow universal fitting to touch any part of URD cabinet, to become grounded
in any other way, or to contact another phase as this will cause erroneous voltage
indication and could cause severe personal injury or damage to equipment.
©
Copyright 2005 Hubbell Power Systems
for
CAUTION
!
NOTICE
®
Auto-Ranging Voltage Indicator, thoroughly read,
!
WARNING
®
Sold by:
Catalog No.
C403-3375
Voltage
69kV - 500kV
®
.
P403-3408
http://www.TWAcomm.com
Toll Free: (877) 389-0000
rev A