L.R. Baggs LR Baggs ACOUSTIC DI User Manual
  1. Manuals
  2. Brands
  3. L.R. Baggs Manuals
  4. Amplifier
  5. LR Baggs ACOUSTIC DI
  6. User manual

L.R. Baggs LR Baggs ACOUSTIC DI User Manual

Hide thumbs

Advertisement

Table of Contents

PARA
ACOUSTIC DI
USER'S GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LR Baggs ACOUSTIC DI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for L.R. Baggs LR Baggs ACOUSTIC DI

Summary of Contents for L.R. Baggs LR Baggs ACOUSTIC DI

  • Page 1 PARA ACOUSTIC DI USER’S GUIDE...
  • Page 2 CONTROLS A. LOW EQ BAND CONTROL (85HZ) Very low bass, almost felt as much as heard. B. NOTCH CONTROL AND TUNE KNOB (98 TO 247HZ) Designed primarily to help with feedback problems. For example, if a particular string is starting to feedback or produce a booming sound, you can use the notch to cut out the problem frequency.
  • Page 3 D. PRESENCE CONTROL (5KHZ) Affects “sss” sounds, cymbal sizzle, brightness. Cut here to remove PA horn “glare” or boost to add life to a dull speaker. E. TREBLE CONTROL (10KHZ) The very highest frequencies, “air” or “frosting”.
  • Page 4 F. BATTERY STATUS LED Stays on when unit is on and then flashes when the battery is low. The LED will start flashing when the battery reaches 6 volts. When it reaches 5 volts, it will stop flashing. G. VOLUME CONTROL Unlike gain, whose adjustment will affect the character and personality of the sound, the volume simply controls the amount of signal that gets out of the box.
  • Page 5 K. 1/4” OUTPUT This is a regular unbalanced output for a standard mono cable. The output signal is the same as on the XLR, allowing you to use the 1/4” out and the XLR simultane- ously for some creative signal routing. L.

  • Page 6: Setting The Gain

    Therefore it can be used as an immaculate, unbalanced direct output. It will not be affected by any of the panel controls (with the exception of the gain control). Use a regular mono cable. The effects loop interrupts the signal path. Therefore, it may also be used as an insert point for a compressor, volume pedal, or tuner if the tuner has a bypass switch.
  • Page 7 such as the Ribbon Transducer, and you fail to turn the gain all the way up, you will need to turn the PA up so loud to hear the pickup that there will be a significant amount of hiss. Conversely, if you plug a high-output active pickup into the Para DI and do not turn down the gain, you will hear a great deal of distortion.

  • Page 8: Limited Warranty

    Register the Para DI online at: lrbaggs.com/product-registration LIMITED WARRANTY L.R. Baggs warrants to the using purchaser that this product shall be free of defects in workmanship and materials under normal and proper use for a period of one year. If you experience problems with the Para DI, please contact your dealer.

Table of Contents

Save PDF