Download Print this page

Louvolite Vision 32 Open Cassette Fitting & Operating Instructions

Advertisement

Quick Links

Vision 32
/ 40
Open Cassette
®
®
Fitting & Operating Instructions
Tel: 0161 882 5050 Email: sales@louvolite.com
Louvolite Customer Services
www.louvolite.com

Advertisement

loading

Summary of Contents for Louvolite Vision 32 Open Cassette

  • Page 1 Vision 32 / 40 Open Cassette ® ® Fitting & Operating Instructions Tel: 0161 882 5050 Email: sales@louvolite.com Louvolite Customer Services www.louvolite.com...
  • Page 2 Vision 32 / 40 Open Cassette ® ® Fitting & Operating Instructions Carefully unwrap the Vision blind and its associated brackets. There are two bracket options for open cassette blinds, face fix and top fix. Face fix bracket Top fix bracket Fitting the brackets.
  • Page 3 The bracket release lip on the bracket must face the back of the blind. Release lip Release lip Mark the hole positions before drilling and plugging if necessary. Use two screws in each bracket ensuring that the brackets are level. Remember to allow room for the blind to clear any obstacles when deployed, e.g.
  • Page 4 Child Safety Your blind will be supplied with either Easybreak connectors attached to the ® operating chain or a cord tidy that will need to be fitted to the wall. Easybreak System ® Two Easybreak connectors are connected to the operating chain 200mm apart ®...
  • Page 5 Cord tidy Disposable red tab fig. 3 Remove the disposable red tab by disengaging it from the chain (fig. 4) and then pull out the disposable red tab (fig. 5). fig. 5 Disposable retaining thrust washer Disposable red tab fig. 4 Position the cord tidy to the wall at the furthest distance below the roller tube adding appropriate tension to the chain and mark its location (fig.
  • Page 6 Split the cord tidy (fig. 7) and mark the remaining offset hole position (fig. 8) before drilling and plugging both location holes if necessary (fig. 9). Screw into the offset hole to fix the back piece of the cord tidy to the wall (fig.
  • Page 7: Note To Installer

    Push fit a cover cap over the screw hole opening (fig. 13). fig. 13 Cover cap Operating the blind. Roller System 32 / 40 Open cassette blinds are reverse rolled. To lower pull the ® ® the front chain downwards with a smooth and steady pressure and to raise, use the rear chain.
  • Page 8 Move beds, cots and furniture away from window covering cords. Do not tie cords together. Make sure cords do not twist and create a loop. Scan this with your smartphone to view Louvolite training videos...

This manual is also suitable for:

Vision 40 open cassette