Table of Contents
Advertisement
i-Mobil SecureCam
Model number SG-88
User guide
Important
You may not use SecureCam:
•
to spy on people
•
watch people without their consent
•
for illegal or immoral activities
Using SecureCam for any of the above may be a criminal offence and could lead to fines and/or imprisonment.
i-Mobil accepts no liability for your actions or activities carried out using SecureCam. If your mobile phone operator becomes aware that
you are using SecureCam for an illegal or immoral purpose it may terminate your contract and refer the matter to the law enforcement
agencies for investigation.
1 Getting to know your SecureCam .........................................3
1.1
Overview................................................................................. 3
1.2
Technical specifications .......................................................... 3
1.3
Environmental conditions ....................................................... 3
1.4
Getting to know your SecureCam ........................................... 3
1.5
Getting started ......................................................................... 4
1.5.1 The USIM card.................................................................... 4
1.5.2 T-FLASH Memory Card ..................................................... 4
1.5.3 Battery................................................................................. 5
1.5.4 Charging the battery............................................................ 5
Contents
Advertisement
Table of Contents
Summary of Contents for i-MOBIL S.A. SecureCam SG-88
- Page 1 i-Mobil SecureCam Model number SG-88 User guide Important You may not use SecureCam: • to spy on people • watch people without their consent • for illegal or immoral activities Using SecureCam for any of the above may be a criminal offence and could lead to fines and/or imprisonment. i-Mobil accepts no liability for your actions or activities carried out using SecureCam.
-
Page 2: Table Of Contents
1.5.5 Understanding indicators.............5 Power on/off................5 Fixing the SecureCam onto the ceiling ........6 SecureCam administration............6 SecureCam’s own phone number..........6 Setting administrator (AD) number.........6 Setting other user numbers............6 User entry................7 SecureCam whitelist .............7 Control the SecureCam by 3G video phone ......7 Camera adjustment..............7 Adjusting speaker volume............7 SecureCam administrator main menu ........8... -
Page 3: Getting To Know Your Securecam
1 Getting to know your SecureCam 1.1 Overview Using the latest 3G technology, the SecureCam is capable of receiving 3G video calls automatically. Users can dial the number of the SecureCam from any 3G Mobile Phone that supports video calls to view real-time video and audio captured by the SecureCam. 1.2 Technical specifications Type SecureCam... -
Page 4: Getting Started
Back view of your SecureCam 1. SIM/USIM card slot 2. T-Flash card slot 3. Reset 4. Power 5. Clear 6. Speaker 7. Charger Connector On the back of the SecureCam. There are 3 slots, for the SIM/USIM, T-Flash Card and charger. Please refer to 1.5.1, 1.5.2 and 1.5.4 respectively for details. -
Page 5: Understanding Indicators
4. Insert the plastic plug back into the T-Flash memory card slot to prevent dust from accumulating. Removing the T-Flash memory card 1. Make sure your charger is disconnected, then press and hold down the power key until the SecureCam is powered off. 2. -
Page 6: Fixing The Securecam Onto The Ceiling
1.7 Fixing the SecureCam onto the ceiling The figures below show how the SecureCam may be fixed onto the ceiling: You can use three screws (screw 1) to connect the bracket and body of the SecureCam firmly. 1. Then you can use two screws (screw 2) to fix the bracket firmly onto the ceiling. 1.Body 2.Brocket 3.Screw1... -
Page 7: User Entry
2.4 User entry White list user: Phone numbers added to white list (including the administrator number). Users on the white list user can make a video call to the SecureCam without entering a PIN (this function depends on the administrator setting) Non-white list user: If the white list is not full and a user makes a video call to the SecureCam with a correct PIN code, the caller’s phone number will be added to the white list automatically. -
Page 8: Securecam Administrator Main Menu
5 SecureCam administrator main menu The first person to dial the SecureCam successfully becomes the administrator. The administrator is able to operate the SecureCam during a video call or via SMS commands. 5.1 Selecting your default Language When you make the first video call, you can select either English or Arabic as the default language for the SecureCam. During the video call, press 1 to choose English or 2 to choose Arabic. -
Page 9: Changing Administrator Number
In main menu, press “3” to enter the “Change PIN” screen. Enter the current PIN code and end with “*” key, then enter the new code and end with “*” key. Press “*” for confirmation. If an incorrect PIN is entered, press the “#” key to go back to main menu. 5.2.4 Changing Administrator number In main menu, press “4”... -
Page 10: Securecam Sms Commands
5.3 SecureCam SMS commands The administrator can also administer the SecureCam by sending SMS commands. Some functions can only be operated by SMS commands – e.g. time setting and BEEP switch setting. Command SMS COMMAND Adding a new user #adduser*[number]#[pin]# Deleting a user #deluser*[number]#[pin]# Modifying user PIN code... -
Page 11: Securecam Operational Modes
disconnected. If the command is set as “off”. The SecureCam won’t allow the video call in the following situations: the incoming call doesn’t carry a caller ID number (may be the caller is roaming or the caller disables caller ID), or the incoming number exceeds 20 digits, or the white list reaches its limit of 20... -
Page 12: Aircraft Safety
Use a damp or anti-static cloth to clean the SecureCam. Do not use chemical or abrasive cleaners as these could damage the case. 7.2 Aircraft safety Onboard an aircraft, please turn off your SecureCam before take-off. In order to protect aircraft communications systems from interference, do not use the SecureCam while in flight. - Page 13 7.10 Statement To maintain compliance with FCC RF exposure requirements, use handset that maintain a 20cm separation distance between the user's body and the host. The MPE for WCDMA FDD Band V is 0.196 W/m and 0.2751 W/m for WCDMA FDD Band II. It satisfies RF exposure compliance. This device complies with part 15 of the FCC rules.