Summary of Contents for Darim VideoSpider
- Page 1 Darim Vision Co. VideoSpider Location Service for PVE400 with GPS USER’S GUIDE 8/31/2008...
-
Page 2: Table Of Contents
Throughout this manual, we make reference to product names that are trademarks of other companies. We are using these names for identification purposes only, with no intention of infringement of the trademarks. Copyright © 2008-2009 Darim Vision Co., All Rights Reserved - 2 -... -
Page 3: Overview
GPS receiver should provide data in NMEA183 format over standard RS232 interface. The VideoSpider software uses the serial port for communication with GPS, to operate with PVE400 – Virtual Serial Port driver should be installed and configured. From the SpiderAdmin... -
Page 4: Live Monitoring
To navigate the map, use the mouse wheel for zooming or onscreen controls on the right side. The View drop-down dialog in the top left corner allows quickly changing some settings ( Figure Copyright © 2008-2009 Darim Vision Co., All Rights Reserved - 4 -... - Page 5 VIDEOSPIDER LOCATION SERVICE Figure 3: Google Earth window Figure 4: "View" menu Copyright © 2008-2009 Darim Vision Co., All Rights Reserved - 5 -...
- Page 6 If you know the exact coordinates of an object, use the property page to enter or edit the precise location ( ). To open the Edit Place mark dialog, right Figure 5 click on the selected placed object. Copyright © 2008-2009 Darim Vision Co., All Rights Reserved - 6 -...
- Page 7 (to the right side from Name, see Figure 5 Other configuration settings are available from the Google Earth main menu, when it is launched separately from VideoSpider. Copyright © 2008-2009 Darim Vision Co., All Rights Reserved - 7 -...
-
Page 8: Playback
Service from the main menu. If during the recording process there have not been GPS data, then this setting will not be available. Figure 6: Launching Google Earth Support Software updates are available from FTP ftp://ftp.darim.com/pub/PVE/VideoSpider/ For technical support, please contact support@darim.com Copyright © 2008-2009 Darim Vision Co., All Rights Reserved - 8 -...