Advertisement
Quick Links
Advertisement
Summary of Contents for Arrista Technologies SignalReach CR500
- Page 1 CR500 Bi-Directional Repeater Installation & User Manual www.signalreach.com...
- Page 2 Copyright1 Printing2Legal statements3 1Copyright 2000- 2004 SignalReach Inc., All Rights Reserved 2Printed in Canada 3Information is subject to change without notice. Arrista Technologies Inc. reserves the right to make changes in design or components as progress in engineering and manufacturing may warrant.
-
Page 3: Table Of Contents
Table of Contents Introduction ________________________________________________________________________2 Functional Description _______________________________________________________________3 Installation Procedure ________________________________________________________________4 Fault Reporting _____________________________________________________________________7 Operation __________________________________________________________________________7 Product Maintenance_________________________________________________________________7 Troubleshooting _____________________________________________________________________8 Copyright © 2004 Arrista Technologies Inc. All rights reserved. -
Page 4: Introduction
Its auxiliary indoor antenna port allows a second indoor zone to be easily covered. This product is designed for installations where cellular coverage is available outside the building, and indoor coverage is inadequate. Copyright © 2004 Arrista Technologies Inc. All rights reserved. -
Page 5: Functional Description
The SignalReach CR500 in-building repeater is compatible with all technologies in the 1900 MHz band, including GSM, TDMA and CDMA. Copyright © 2004 Arrista Technologies Inc. All rights reserved. -
Page 6: Installation Procedure
A general rule of thumb is to locate the antennas where the isolation is at least 10 dB greater than the operating Copyright © 2004 Arrista Technologies Inc. All rights reserved. - Page 7 Select a suitable location for the subscriber (indoor) antenna, and connect it to the Ant 1 port of the repeater. If only one subscriber (indoor) antenna is to be used, flip the switch to Copyright © 2004 Arrista Technologies Inc. All rights reserved.
- Page 8 (try relocating the antenna) or a handset is operating too close to the indoor antenna. If it was caused by a handset operating too close, the status LED should extinguish when the handset is moved further away from the antenna. Copyright © 2004 Arrista Technologies Inc. All rights reserved.
-
Page 9: Fault Reporting
Maintenance installed following the guidelines stated in this manual. It is recommended that all RF connectors be periodically checked for corrosion, strain relief. Also periodically check the integrity of power connections Copyright © 2004 Arrista Technologies Inc. All rights reserved. -
Page 10: Troubleshooting
The repeater has detected Interrupt power to the unit flashing, status an internal fault and is off- to see if it returns to LED is red line. normal operation, otherwise service is required. Copyright © 2004 Arrista Technologies Inc. All rights reserved. -
Page 11: General Specifications
Net Weight 1.5 kg (3.2 lbs) RF Connectors TNC Female Subscriber Antenna Customer Supplied Donor Antenna Customer Supplied 120V AC adapter, the adapter complies to UL and CSA safety Included Accessories standards Copyright © 2004 Arrista Technologies Inc. All rights reserved.
Need help?
Do you have a question about the SignalReach CR500 and is the answer not in the manual?
Questions and answers