Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Biamp Tesira Forte
Summary of Contents for Biamp Tesira Forte
- Page 1 OPERATION MANUAL January 2018...
- Page 2 TesiraFORTÉ FIXED I/O DEVICE PRODUCT DESCRIPTION The TesiraFORTÉ products are server-class devices that are designed to operate as standalone processing devices, with Tesira expanders and controllers, or as part of a full set of Tesira devices. TesiraFORTÉ AI, CI and VT products feature 12 analog mic/line level inputs and 8 analog mic/line level outputs in a fixed configuration.
- Page 3 TesiraFORTÉ FIXED I/O SERVER DEVICES FRONT PANEL TesiraFORTÉ Front Display 1 – Ventilation fan cover 2 – Display navigation buttons 3 – LED status indicators 4 – OLED display Ventilation fan cover Each device has a perforated cover to allow cool air into the chassis. A variable speed temperature controlled fan allows air into the front of the unit and out of the rear left side.
- Page 4 OLED Display The OLED display provides information about the server device as well as the Tesira system that is connected to the server. The OLED display is read-only. Home Screen The home screen is the default screen that shows the overview of the device. If the text is too long to fit on the entire display, it will scroll to the left.
- Page 5 Faults If a fault is present in the system an exclamation icon is shown on the lower right of the screen. Each unique fault in the system will be listed. Edit Timeouts Dim Mode The display has a screensaver mode where it will dim the display brightness. Pressing any button will bring the screen back to the original brightness and respond to the control movement.
- Page 6 TesiraFORTÉ FIXED I/O SERVER DEVICES REAR PANEL TesiraFORTÉ VT AVB model (Rear Panel View) TesiraFORTÉ VT4 AVB model (Rear Panel View) TesiraFORTÉ CI AVB model (Rear Panel View) TesiraFORTÉ AI AVB model (Rear Panel View) 1. AC power inlet (100 – 240V) 6.
- Page 7 Control Ethernet Port Gigabit port used to configure the TesiraFORTÉ unit with Tesira and Biamp Canvas™ software. Can also be used to attach additional GPIO, receive third-party commands over IP as well as provide physical control interfaces to a system.
- Page 8 TesiraFORTÉ FIXED I/O SERVER DEVICES QUICK START Getting started 1. Install Tesira software on a Windows PC. The software must be Tesira version 3.2 or later. • The most up-to-date version can be downloaded from the Biamp website, https://www.biamp.com • 2. Minimum PC requirements: Windows ®...
- Page 9 TesiraFORTÉ FIXED I/O SERVER DEVICES QUICK START Setting an IP address It may be a requirement to configure your PC or TesiraFORTÉ IP address. Please review the following section. Assigning your computer’s IP address Go to Control Panel > Network and Sharing Center. Click on Local Area Connection. The Local Area Connection Status Dialog will open.
- Page 10 TesiraFORTÉ FIXED I/O SERVER DEVICES QUICK START The Internet Protocol Version 4 (TCP/IPv4) Properties will open. Update the IP address and Subnet mask to ‘Obtain an IP address automatically’ Click OK when complete. Click OK on the Local Area Connection properties dialog to confirm the changes. The PC may take up to one minute to resolve an IP address.
- Page 11 This equipment is not user serviceable. If trouble is experienced with this equipment, for repair or warranty information, please contact Biamp Systems Corporation, phone number 503.641.7287. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
- Page 12 Canada TesiraFORTÉ VT, TesiraFORTÉ AVB VT, TesiraFORTÉ AVB VT4, TesiraFORTÉ DAN VT, TesiraFORTÉ DAN VT4. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le présent produit est conforme aux spécifications techniques applicables d'Innovation, Sciences et Développement économique Canada.
Need help?
Do you have a question about the Tesira Forte and is the answer not in the manual?
Questions and answers